Konica Minolta bizhub 200 - Manual (Page 339)

Various settings 11
200/250/350 11-72
2
Reminder
To apply any changes to settings for “Enable NetWare”, “Frame Type”,
“Print Queue Scan Rate”, “Mode”, or “Printer Number”, restart this ma-
chine (turn the main power off, then on again).
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
Preferred NDS Tree Enter the preferred NDS tree name (up to 63 alphanumeric charac-
ters, excluding / ¥ : ; , * [ ] < > | + = ?).
Print Queue Scan Rate Enter the print queue scan rate (input range: 1-65535 seconds).
Mode Select “PServer” or “NPrinter/RPrinter” as the operation mode of the
print server.
Printer Number Enter the Nprinter/Rprinter printer number (input range: 0-255, 255
is automatically given).
Item Description