Konica Minolta bizhub 200 - Manual (Page 271)

Various settings 11
200/250/350 11-4
Overwrite A4
← →Letter
You can substitute letter size and 11×17-inch size with A4 or A3 size paper.
When letter size paper is not loaded and letter size paper has been specified
to print, you can print on A4 size paper, which is close in size to letter size
paper, and not cause an error. (Default setting: OFF)
% After changing the setting, touch [Enter].
–
ON: Substitutes letter size paper for A4 size paper when A4 size pa-
per is not available. Substitutes 11×17-inch size paper with A3 size
paper when 11×17-inch size paper is not available.
– OFF: Does not substitutes letter size or 11×17-inch size paper with
other paper sizes even when letter size or 11×17-inch size paper
are not available.
Document Hold Time
You can specify the minutes until a job that is being received is deleted when
the memory has exceeded capacity when spooling. (Default setting: 5 M.)
% After using the keypad to type in a value, touch [Enter].
–
0to30: Specifies the time in which to delete the data.