Konica Minolta bizhub 200 - Manual (Page 320)

Various settings 11
200/250/350 11-53
2
Note
The staple function is displayed only when optional finisher is installed.
The hole punching function is displayed only when punch unit is installed.
Item Description
4-In-1 Copy Order Specify the page order when the 4-in-1 combination function is
used.
Default
Quality/
Density
Modes Density Specify the default settings of the copy density.
Quality
Type Specify the default settings of the copy quality.
Default
Copy
Density
Levels For Auto
Mode Specify the auto default settings of the copy density.
For Manual
Mode Specify the manual default settings of the copy density.
Print Exposure Specify the print density.
Default
Finishing
Mode Output
Mode
(Sort) Specify the offset default setting.
Output
Mode
(Staple) Specify the staple default setting.
Output
Mode
(Punch) Specify the hole punching default setting.