Konica Minolta bizhub 200 - Manual (Page 28)

Overview 1
200/250/350 1-5
Connectable interfaces
The various interfaces that can be used to connect this printing system to a
computer are described below.
Ethernet interface
Connect when using this printing system as a network printer.
Supports 10Base-T and 100Base-TX standards. In addition, the Ethernet in-
terface supports the TCP/IP (LDP/LPR, peer-to-peer), IPX/SPX (NetWare),
and AppleTalk (EtherTalk) protocols.
Parallel interface (optional)
Connect when using this printing system as a local printer.
A computer running Windows and an IEEE 1284 parallel cable are required
for connection. Use a parallel cable that uses a terminal with an Amphenol
36-pin male connector.
The parallel interface supports the compatible, nibble, and ECP modes.
USB interface
Connect when using this printing system as a network printer.
The USB interface can be connected to a computer running Windows Me/
2000/XP/Vista/Server 2003. A USB cable is required for connection. Use a
type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measur-
ing 3 meters or less is recommended.
2
Note
The USB interface cannot be connected to computers running Windows
NT 4.0/98 SE or Mac OS 9/OS X.