Konica Minolta bizhub 200 - Manual (Page 286)

Various settings 11
200/250/350 11-19
2
Note
The time specified here for a timeout enables the parallel, USB, or net-
work interface.
A value outside the allowable range cannot be specified. Type in a value
within the allowable range.
To cancel changes to the settings, touch [Cancel].
No Matching Paper in Tray Setting
You can select the process for when there is no matching paper in the spec-
ified input tray.
Tray Priority: Feeds paper from a different input tray.
Tray Fixed: Displays a warning message without printing. If paper is specified
that cannot be loaded in the specified input tray, the job is deleted.
Setting the IP Address
When using this machine as a network printer, an IP address must be as-
signed to this machine.
!
Detail
For the procedure to assign an IP address to this machine, refer to “Set-
ting the IP address for this machine” on page 3-6.
Frame Type Set
If connecting with NetWare, the frame type must be specified depending on
the network environment.
1
Press the [Utility/Counter] key on this machine’s control panel, touch
[Admin. Management], and then enter the administrator password.