7 specifying the quality tab settings, Adjusting the quality, Font settings – Konica Minolta bizhub 200 User Manual
Page 216: Specifying the quality tab settings -31, Adjusting the quality -31 font settings -31
Setting up the VXL/VPS driver (Windows Vista)
7
200/250/350
7-31
7.7
Specifying the Quality tab settings
Adjusting the quality
1
Click the Quality tab.
2
Specify settings for the following:
Font Settings
You can replace the TrueType fonts used in Windows with the printer fonts
of this machine.
1
Click the Quality tab.
2
Click the [Font Settings] button.
3
Specify settings for the following:
Resolution
Specifies the print resolution. (The resolution cannot be changed on
this machine.)
Pattern
Select “Coarse” or “Fine” for the printing pattern.
This function is only available with the Windows Vista PCL driver
(VXL).
Image Compression
Specifies the compression ratio for an image.
This function is only available with the Windows Vista PCL driver
(VXL).
Print with Black
Specifies the data to be printed in black. Prints in black except the
white areas.
This function is only available with the Windows Vista PCL driver
(VXL).