beautypg.com

Konica Minolta bizhub C650 User Manual

Page 75

background image

C650

2-48

Scanning

2

3

Type in the destination information.

The entered addresses appear under "Broadcast Destinations".

To specify an additional address, touch [Next Destination], and then enter the information.

4

To specify advanced settings, touch [Detailed Settings], and then specify the settings.

5

Touch [OK], and then touch [OK] in the next screen that appears.

6

Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desired
scan settings.

For details on the scan settings, refer to "Specifying scan and transmission settings (Scan
Settings/Original Settings/Communication Settings)" on page 2-53.

7

Load the document into the ADF or place it on the original glass.

8

If desired, press the [Proof Copy] key to check a preview image.

For details, refer to "Sending after previewing" on page 2-15.

9

Press the [Start] key in the control panel.

Scanning of the document begins, and the data is sent.

2

Note

Do not turn off the machine until the scan job is deleted from the Job List screen.