Konica Minolta bizhub C650 - Manual (Page 202)

C650 4-22
Network Settings 4
4
Touch [OK], and then touch [OK] in the next screen that appears.
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
IKE Settings (IPsec Settings)
Specify the settings for the IKE protocol used during IPsec communication. Settings can be specified for the
following.
!
Detail
Different combinations of the encryption algorithm and authentication algorithm settings for IPsec
communication can be saved in four groups.
0 In order to apply the IPsec settings, settings must be specified for "IKE Settings", "IPsec SA Settings"
and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
2
To specify settings, touch [ON], and then touch [IKE Settings].
IKE Settings screen 1/2 appears.
3
Select the group where the algorithm combination will be stored, and then specify the algorithms.
Parameter Description
Encryption Algorithm Select the encryption algorithm to be used when creating control tunnels.
Authentication Algorithm Select the authentication algorithm to be used when creating control tunnels.
Key Validity Period Specify the length of time that the key is valid after being generated when creating con-
trol tunnels.
Diffie-Hellman Group Select the Diffie-Hellman group.