Konica Minolta bizhub C650 - Manual (Page 130)

C650 3-9
Specifying Utility mode parameters 3
11
Touch [OK].
12
Touch [Icon], and then select an icon.
– The icons are used in the image panel function which can be operated when the optional i-Option
LK-101 or i-Option LK-103 is installed.
13
Touch [OK], and then touch [OK] in the next screen that appears.
The e-mail destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit]. The registration
number cannot be changed in the Edit screen.
To delete a registered destination, select it, and then touch [Delete].
2
Note
The registration cannot be completed if no settings are specified for "Name" and "E-Mail Address".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
User Box
Settings can be specified for the following for the user box destination to be registered.
Parameter Description
No. Type in the registration number (between 1 and 2000) for the address book destina-
tion. If nothing is entered when [OK] is touched, the destination is registered with the
lowest available number.
Name Type in a name of 24 characters or less for the registered destination.
User Box Select one user box where data is to be saved.
Index Select the index characters. For frequently used destinations, touch [Favorites] so
that the destination can be found more easily.
Icon Select an icon.