Konica Minolta bizhub C650 - Manual (Page 241)

C650 4-61
Network Settings 4
4.10 E-Mail RX (POP)
Specify these settings when authentication of the e-mail sender is performed by POP before SMTP. Settings
can be specified for the following.
E-Mail RX (POP) screen 1/4
E-Mail RX (POP) screen 2/4
E-Mail RX (POP) screen 3/4
!
Detail
When using APOP to log on to the POP server, the password is encrypted with Digest-MD5. If "APOP
Authentication" was set to "ON", it is not possible to log on to the server if the POP server is not
compatible with APOP.
E-Mail RX (POP) screen 4/4
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [7 E-Mail Settings] in the Network Settings screen.
Parameter Description
POP Server Address Specify the address of the POP server used to send e-mail messages. For details, refer
to "POP Server Address" on page 4-64.
Connection Timeout If communication stops while an e-mail message is being received from the POP serv-
er, the e-mail reception operation is automatically aborted after a specified length of
time has passed. Specify the length of time from the point when the reception stops
to the point when the reception operation is to be aborted. To change the setting,
touch [+] or [-] to specify the setting (in 30-second increments). (Range: 30 to 300 sec-
onds)
Parameter Description
SSL Setting Select whether or not SSL is used during e-mail receptions. When SSL is used, the
communication settings are encrypted.
Port No. Specify the number of the port used for communicating with the POP server. To
change the setting, touch [Input], press the [C] (clear) key, and then use the keypad to
type in the desired port number. (Range: 1 to 65535)
Port Number (SSL) Specify the port number when SSL is used. To change the setting, touch [Input], press
the [C] (clear) key, and then use the keypad to type in the desired port number. (Range:
1 to 65535)
Parameter Description
Login Name Specify the logon name for connecting to the POP server. Use the keyboard that ap-
pears in the touch panel to type in the logon name (63 characters or less).
Password Specify the password for connecting to the POP server. Use the keyboard that ap-
pears in the touch panel to type in the password (15 characters or less).
APOP Authentication Select whether or not the logon name and password are encrypted when logging on
to the POP server.
Parameter Description
Check for New Messages Select whether or not the server is automatically checked for received e-mail messag-
es.
Polling Interval Specify the polling interval. To change the setting, press the [C] (clear) key, and then
use the keypad to type in the desired setting. (Range: 1 to 60)