beautypg.com

Document name, Document name -88, P. 2-88 – Konica Minolta bizhub C650 User Manual

Page 115

background image

C650

2-88

Scanning

2

5

To select the staple position, touch [Corner] or [2 Position], and then touch [Position Setting].

6

Touch the button for the desired position, and then touch [OK].

7

Touch [OK], and then touch [OK] in the next two screens that appear.

Document Name

Specify the name of the scan data. If no document name is specified, the name is automatically set based
on the following information.

As an example, the name "SKMBT_C65008102315230" is described below.

Section

Description

S

This letter indicates the mode when the document was saved.
C: Copy
S: Fax/Scan
P: Print

2

Note

"S" appears for documents saved in the Fax/Scan mode screen or the User Box
screen.

KMBT_C650

This represents the name of the device that scanned the data. The factory default is
"KMBT_C650". This name can be changed with the "Input Machine Address" param-
eter on the Administrator/Machine Setting screen in Administrator mode. A name of up
to 10 characters can be specified.

08102315230

This indicates the year (last two digits), month, day, hour and minutes when the data
was scanned. The last digit is a serial number if the document is part of a series of
scans.

_0001

This indicates the page when multi-page data is scanned. This numeral does not ap-
pear in the screen for the document name; however, it is added automatically as part
of the name when the document is routed. Add this part to the name according to the
naming conditions of the server receiving the files, for example, when data is sent by
FTP.