Preview - view status, Sending after previewing – Konica Minolta bizhub C650 User Manual
Page 42
C650
2-15
Scanning
2
Preview - View Pages - Change Setting
The following settings specified before scanning the original can be changed.
The new settings are applied to the originals scanned after the change of setting.
Preview - View Status
Select whether or not to continue scanning.
Sending after previewing
The following procedure describes the operations performed after a destination is specified with a Scan/Fax
program, from the address book, or by directly entering the address, and the document is positioned. For
details on specifying destinations, refer to the descriptions starting with "Using Scan/Fax programs" on
page 2-18.
Parameter
Description
Basic - Document
Select whether a single-sided or double-sided document is to be scanned. If "Cover
+ 2-Sided" was selected, "Cover + 2-Sided" can also be selected.
Basic - Binding Position
This item can be selected when the destination of "E-Mail", "User Box", "FTP",
"SMB" or "WebDAV" is specified and "Book Copy" is not selected.
Basic - Original Size
This item can be selected when "Mixed Original" is specified.
Application - Frame Erase
Specify the width of the area to be deleted from around the edge of the document.
Application - Center Erase
When [Center Erase] appears and is able to be selected, Center Erase can be spec-
ified.
Item
Description
[Finish]
To continue scanning after the currently displayed orijginal, make sure that [Finish]
is not selected.