Using ntlm v1 and ntlm v2, Using ntlm v1 and ntlm v2 -6 – Konica Minolta bizhub C650 User Manual
Page 186
C650
4-6
Network Settings
4
–
Set "User Authentication" to "External Server Authentication".
–
For details on the user authentication and account track settings, refer to the User’s Guide [Copy
Operations].
8
Touch [Administrator Settings], then [1 System Settings], then [3 Date/Time Setting], and then specify
settings for the following.
–
For details on specifying the date and time settings, refer to the User’s Guide [Copy Operations].
–
Specify the current time and the time zone.
–
If the settings for the NTP server (time adjustment) are specified, the time on this machine can be
set correctly through the network. For details, refer to "Time Adjustment Setting" on page 4-87.
–
To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
Using NTLM v1 and NTLM v2
Before performing the operation, make sure that the following information is available.
-
Administrator password (required)
-
Default domain name (required)
-
List of users for authentication (required)
!
Detail
Do not use "”" or "+" in the external server password. For details on the operating conditions of the
external server, contact the network administrator.
If "Password Rules" is set to "Enable", only a password with 8 digits can be specified. For details on
the password rules, refer to the User’s Guide [Copy Operations].
2
Note
NTLMv2 is applied from Windows NT 4.0 (Service Pack 4).