Konica Minolta bizhub C650 - Manual (Page 235)

C650 4-55
Network Settings 4
SMTP Detail screen (displayed by touching [Detail Setting])
!
Detail
If the POP and SMTP servers are different, the POP server must notify the SMTP server when the POP
server is logged on to. Therefore, if the time specified for "POP Before SMTP Time" is too short, it may
not be possible to send e-mail.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [7 E-Mail Settings] in the Network Settings screen.
3
Touch [1 E-Mail TX (SMTP)].
E-Mail TX (SMTP) screen 1/5 appears.
Port No.
(SSL) Specify the port number used with SSL communications if "SMTP over SSL" was se-
lected. To change the setting, touch [Input], press the [C] (clear) key, and then use the
keypad to type in the desired port number. (Range: 1 to 65535)
Parameter Description
Parameter Description
SMTP Authentication Select whether or not SMTP authentication is used. Touching [ON] displays a screen
for entering SMTP authentication information. For details, refer to "SMTP Authentica-
tion" on page 4-59.
POP Before SMTP Authenti-
cation Select whether or not POP Before SMTP authentication is used.
POP Before SMTP Time Specify when POP Before SMTP authentication is used. To change the setting, press
the [C] (clear) key, and then use the keypad to type in the desired setting. (Range: 0 to
60 seconds)