Konica Minolta bizhub C650 - Manual (Page 147)

C650 3-26
Specifying Utility mode parameters 3
To change the default setting, select a subject, and then touch [Set as Default].
2
Note
The registration cannot be completed if no setting is specified for "Subject".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
E-Mail Text
Up to 10 e-mail message body texts can be registered. A registered body text can be selected when sending.
1
Touch [3 E-Mail Settings] in the Create One-Touch Destination screen.
– For details on displaying the Create One-Touch Destination screen, refer to "Displaying the Create
One-Touch Destination screen" on page 3-3.
2
Touch [2 E-Mail Body].
The E-Mail Body screen appears.
3
Touch [New].
The New screen appears.
4
Touch [Body], and then type in the registration body text, using the keyboard that appears.
– For details on typing in text, refer to "Entering text" on page 6-3.
– Up to 256 characters can be entered.
5
Touch [OK].
The e-mail body text is registered.