Konica Minolta bizhub C650 - Manual (Page 209)

C650 4-29
Network Settings 4
NetWare Print Settings
NetWare print settings can be specified and the status can be checked. Settings can be specified for the
following.
If "PServer" was selected as the NetWare print mode, specify settings for the following.
If "Nprinter/Rprinter" was selected as the NetWare print mode, specify settings for the following.
2
Note
To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired value.
The name of the print server should contain 10 characters or less.
1
Touch [5 Network Setting] in the Administrator Settings screen.
2
Touch [2 NetWare Settings] in the Network Settings screen.
The NetWare Setting screen appears.
3
Touch [2 NetWare Print Settings].
Parameter Description
NetWare Print Mode Select PServer or Nprinter/Rprinter as the print mode to be used.
Status The NetWare status can be checked.
Parameter Description
Print Server Name Specify the print server name. Use the keyboard that appears in the touch panel to
type in the server name (63 characters or less).
Print Server Password Specify the password required when the print server logs on to the file server. Use the
keyboard that appears in the touch panel to type in the password (63 characters or
less).
Polling Interval Specify the interval for searching the print queue. (Range: 1 to 65535)
NDS/Bindery Setting If "NDS" is selected, bindery is disabled. If "NDS & Bindery" is selected, both NDS and
bindery are enabled.
File Server Name Specify the name of the file server where the print server logs on. Use the keyboard
that appears in the touch panel to type in the server name (47 characters or less).
NDS Context Name Specify the NDS context name. Use the keyboard that appears in the touch panel to
type in the NDS context name (191 characters or less).
NDS Tree Name Specify the NDS tree name. Use the keyboard that appears in the touch panel to type
in the NDS tree name (63 characters or less).
Parameter Description
Print Server Name Specify the print server name. Use the keyboard that appears in the touch panel to
type in the printer name (63 characters or less).
Printer Number Specify the printer number. To obtain it automatically, touch [Auto]. (Range: 1 to 254)