Konica Minolta bizhub C650 - Manual (Page 118)

C650 2-91
Scanning 2
– Touching [Binding Position] displays the Binding Position screen. Touch the button for the binding
position, and then touch [OK].
– To apply the "Despeckle" setting, touch [Despeckle] to select it.
3
Touch [OK], and then touch [OK] in the next screen that appears.
!
Detail
The scanning speed will be reduced if the "Despeckle" setting is selected.
Clean the left partition glass when it becomes extremely dirty. For details, refer to the User’s Guide
[Copy Operations].
E-Mail Setting
When data is sent, an e-mail message containing the document name can be sent to the specified e-mail
address.
!
Detail
The information specified as the document name is used with Scan to FTP, Scan to SMB and Scan to
WebDAV operations.
If "Change the "From" Address" (displayed by touching [System Settings] on the Administrator Settings
screen, then [Restrict User Access], then [Restrict Operation]) is set to "Restrict", the From address
cannot be entered directly.
Parameter Description
Document Name The name of the file to be saved is displayed. The document name specified later ap-
pears as the document name, even if the document name was specified with "Docu-
ment Name" on the Scan Settings screen. If no document name is specified, the name
automatically specified based on the settings in the Administrator Settings screen is
displayed. A maximum of 30 characters can be entered.