6 ftp settings, Ftp tx settings, Ftp settings -39 ftp tx settings -39 – Konica Minolta bizhub C650 User Manual
Page 219
C650
4-39
Network Settings
4
4.6
FTP Settings
Specify the communication settings where an FTP server is used.
FTP TX Settings
Specify the settings for sending scan data to an FTP server. Settings can be specified for the following.
1
Touch [5 Network Setting] in the Administrator Settings screen.
–
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [4 FTP Settings] in the Network Settings screen.
3
Touch [1 FTP TX Settings].
FTP TX screen 1/2 appears.
4
To use FTP, touch [ON], and then specify the desired settings.
Parameter
Description
Proxy Server Address
Specify the address of the proxy server. Type in the address in the format of a host
name, IPv4 address or IPv6 address.
Proxy Server Port Number
Specify the port number for the proxy server. To change the setting, press the [C]
(clear) key, and then use the keypad to type in the desired port number. (Range: 1 to
65535)
Port No.
Specify the number of the port used for communicating with the FTP server. To change
the setting, press the [C] (clear) key, and then use the keypad to type in the desired
port number. (Range: 1 to 65535)
Connection Timeout
If transmission stops while data is being uploaded to the FTP server, the upload oper-
ation is automatically aborted after a specified length of time has passed. Specify the
length of time from the point when the transmission stops to the point when the upload
operation is to be aborted. To change the setting, press the [C] (clear) key, and then
use the keypad to type in the setting. (Range: 5 to 300 seconds)