Konica Minolta bizhub C650 - Manual (Page 29)

C650 2-2
Scanning 2
2 Scanning
2.1 Control panel
1
2
4
5
3
6
7
8
13 14 12 9
15
16
17
18
11 10
19
20
21
22
No. Part Name Description
1 Touch panel Displays various screens and messages. Specify the various settings by di-
rectly touching the panel.
2 Main Power indicator Lights up in blue when the machine is turned on with the main power switch
3 Sub power switch Press to turn on/off machine operations, for example, for copying, printing or
scanning. When turned off, the machine enters a state where it conserves en-
ergy.
4 [Mode Memory] key Press to register (store) the desired scan settings as a program or to recall a
registered scan program.
5 [Utility/Counter] key Press to display the Meter Count screen and the Utility screen.
6 [Reset] key Press to clear all settings (except programmed settings) entered in the control
panel and touch panel.
7 [Interrupt] key Press to enter Interrupt mode. While the machine is in Interrupt mode, the in-
dicator on the [Interrupt] key lights up in green and the message "Now in Inter-
rupt mode." appears on the touch panel. To cancel Interrupt mode, press the
[Interrupt] key again.
8 [Stop] key Pressing the [Stop] key during scanning temporarily stops the scan operation.
9 [Proof Copy] key Press to print a single proof copy to be checked before printing a large number
of copies. By pressing the [Proof Copy] key before scanning or copying, the
result can be viewed on the touch panel.
10 [Start] key Press to start scanning. When this machine is ready to begin scanning, the in-
dicator on the [Start] key lights up in blue. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
11 Data indicator Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
12 [C] (clear) key Press to erase a value (such as the number of copies, a zoom ratio, or a size)
entered using the keypad.
13 Keypad Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.