8 send a fax with program destination, Sending a fax after specifying program destination, Send a fax with program destination -40 – Konica Minolta bizhub C550 User Manual
Page 84
Transmission
2
C550
2-40
2.8
Send a fax with Program destination
When the program destination is registered, a fax can be sent by specifying
the registered program button.
If transmission settings (Original type and original specification etc.) are reg-
istered by a program button, a fax can be sent only by touching that button
without specifying function settings at each time.
The transmission is possible once after registering group button in 1 program
button.
Sending a fax after specifying program destination
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
Refer to “Loading the original” on page 2-13 for details on position-
ing the original.
3
Press [Mode Memory]
key.