Konica Minolta bizhub C550 - Manual (Page 287)

Utility mode 9
C550 9-37
9.10 Specifying whether to reset the destination and set-
tings (Reset Data After Job)
Select whether the settings are reset to their defaults or whether they remain
for the next fax.
Reset Data After Job: Reset All*/Reset Destination Only /Confirm with User
-
Reset Destination Only: Select this setting to retain the settings and reset
only the destination.
- Confirm with User: Select this setting to display a confirmation message
asking whether or not to reset the settings and destination.
* is a default value at the time of purchase.
Setting Reset Data After Job
1
Display the Administrator Settings screen after referring to “Displaying
Administrator Settings screen” on page 9-4.
2
Touch [System Settings].
– Some items may not be displayed, depending on the specified op-
tion settings.
– In Utility mode, items can also be selected by pressing the key in
the keypad for the number beside the desired button. For “System
Settings”, press the [1] key in the keypad.