Konica Minolta bizhub C550 Instruction Manuals and User Guides
We have 27 Instruction Manuals and User Guides for bizhub C550 Konica Minolta
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 400 |
| Size: | 9.08 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 Installing the printer driver
- 2.1 Printer drivers and supported operating systems
- 2.2 When used with Windows
- Automatic installation using the installer
- To install the printer driver
- Installing the printer driver using the Add Printer Wizard
- For Windows XP/Server 2003
- For Windows Vista
- When using Web service printing under Windows Vista
- For Windows 2000/NT 4.0
- Installing the printer driver using Plug and Play
- For Windows 2000
- For Windows XP/Server 2003
- For Windows Vista
- Uninstalling the printer driver
- When the printer driver contains the delete function
- When the printer driver does not contain the delete function
- 2.3 When used with Macintosh
- 3 Setting up network printing
- 3.1 Overview of network functions
- 3.2 Setting the IP address for this machine
- 3.3 Accessing PageScope Web Connection
- 3.4 SMB printing
- 3.5 LPR printing
- 3.6 Port 9100 printing (Windows 2000/XP/Server 2003/ Vista)
- 3.7 IPP printing (Windows 2000/XP/Server 2003/Vista)
- 3.8 Printing with NetWare
- Network printing in a NetWare environment
- For Remote Printer mode with NetWare 4.x bindery emulation
- For Print Server mode with NetWare 4.x bindery emulation
- For NetWare 4.x Remote Printer mode (NDS)
- For NetWare 4.x/5.x/6 Print Server mode (NDS)
- For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
- Specifying client (Windows) settings when using the NetWare server
- 3.9 Printing with Macintosh
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Original Orientation
- Original Size and Paper Size
- Zoom (enlargement and reduction)
- Paper Tray (paper source)
- Paper Type
- Output Method (job management)
- User Authentication
- Account Track
- Collate and Offset
- Combination/Poster Mode
- Skip Blank Pages (saving paper)
- Chapters
- Print Type (duplex printing/booklet printing)
- Image Shift
- Stapling and hole punching
- Center Staple and Fold/Fold
- Paper Arrangement
- Cover Mode and Transparency Interleave
- Per Page Setting
- Watermark
- Overlay
- Copy Protect
- Date/Time and Page Number
- Header/Footer
- Quality Adjustment
- Use Printer Fonts (substitute fonts)
- 4.3 Specifying the printer driver basic settings
- 5 Setting up the PCL driver (Windows)
- 5.1 Settings
- 5.2 Specifying the Basic tab settings
- 5.3 Specifying the Layout tab settings
- 5.4 Specifying the Finish tab settings
- 5.5 Specifying the Cover Mode tab settings
- 5.6 Specifying the Stamp/Composition tab settings
- 5.7 Specifying the Quality tab settings
- 5.8 Specifying the Other tab settings
- 5.9 Specifying the Configure tab settings
- 5.10 Specifying the Settings tab settings
- 5.11 Saving the driver settings
- 6 Setting up the PostScript driver (Windows)
- 6.1 Settings
- 6.2 Specifying the Basic tab settings
- 6.3 Specifying the Layout tab settings
- 6.4 Specifying the Finish tab settings
- 6.5 Specifying the Cover Mode tab settings
- 6.6 Specifying the Stamp/Composition tab settings
- 6.7 Specifying the Quality tab settings
- 6.8 Specifying the Other tab settings
- 6.9 Specifying the Configure tab settings
- 6.10 Specifying the Settings tab settings
- 6.11 Saving the driver settings
- 7 Setting up the PPD driver (Mac OS 9.2)
- 8 Setting up the PPD driver (Mac OS X)
- 9 Various settings
- 9.1 Print settings in Utility mode
- Default settings
- To display the User Settings screen
- PDL Setting
- Number of Copies
- Original Direction
- Spool setting
- Paper size change
- Banner Sheet Setting
- Binding Direction Adjustment
- Line Width Adjustment
- Paper Tray
- Paper Size
- 2-Sided Print
- Binding Position
- Staple
- Punch
- Banner Paper Tray
- Font Settings
- Symbol Set
- Font Size
- Line/Page
- CR/LF Mapping
- Print PS Errors
- ICC Profile Settings
- Verify XPS Digital Signature
- Print Reports
- 9.2 Print settings in Administrator mode
- 9.3 Print job management
- Specifying job operations
- Specifying settings (for Windows)
- Specifying settings (for Mac OS X)
- Job storage
- Recalling jobs (Proof Print)
- Recalling jobs (Secure Print)
- When “Confidental Document Access Method” is set to “Mode 1”
- When “Confidental Document Access Method” is set to “Mode 2”
- Recalling jobs (Save in User Box)
- Printing with this machine when user authentication settings have been applied
- Specifying settings (for Windows)
- Specifying settings (for Mac OS X)
- Printing with this machine when account track settings have been applied
- Specifying settings (for Windows)
- Specifying settings (for Mac OS X)
- Job operations on PageScope Web Connection
- 9.1 Print settings in Utility mode
- 10 Troubleshooting
- 11 Appendix
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 65 |
| Size: | 2.99 MB |
Show table of contents
Document Outline
- Contents
- About this product
- Trademarks and registered trademarks
- 1 Foreword
- 2 Installing the Setup Utility for RightFax
- 3 Writing an application to a multifunctional peripheral
- 4 Using an application
- 4.1 Reading an application
- 4.2 Description of the Application Registration window
- 4.3 Device Information page
- 4.4 Application Information page
- 4.5 Server Setting page
- 4.6 Extension Setting page
- 4.7 Scan Setting page
- 4.8 Notification Setting page
- 4.9 Registering new applications
- 4.10 Saving an application as a file
- 5 Managing RightFax server information
- 6 Managing the information for multifunctional peripherals
- 7 Retrieving the job history
- 8 Writing an address book to a multifunctional peripheral
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 633 KB |
Show table of contents
Document Outline
- Contents
- About this product
- Trademarks and registered trademarks
- 1 Introduction
- 2 Installing License Install Utility
- 3 Using License Install Utility
- 3.1 Starting License Install Utility
- 3.2 Exiting License Install Utility
- 3.3 Main window
- 3.4 Registering devices
- 3.5 Specifying the search range
- 3.6 Registering an active token certificate
- 3.7 License Management Settings
- 3.8 Displaying the license code
- 4 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 12 |
| Size: | 752 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 403 |
| Size: | 10.74 MB |
Show table of contents
Document Outline
- Contents
- Introduction
- Special Notice to User
- Available features
- Confirming whether the original is scanned or not
- Sending after erasing shadows
- Specifying a scanning area size on the original
- Sending originals of different sizes with one operation
- Sending an original with fold lines
- Sending long originals
- Sending double-paged originals
- Specifying the binding position of double-sided originals
- Sending after adjusting the density of background color
- Sending after emphasizing character edges
- Sending a color fax
- Prohibiting the print out of received originals (Memory RX function)
- Explanation of manual conventions
- Descriptions of original documents and paper
- User’s guides
- 1 Before use
- 2 Transmission
- 2.1 General fax operation (Internet Fax)
- 2.2 General fax operation (IP Address Fax)
- 2.3 Loading the original
- 2.4 Specifying transmission color settings (IP Address Fax)
- 2.5 Specifying the scan conditions
- 2.6 Specifying only one destination
- Specifying from registered destination
- Searching the registered destination (Search text button)
- Searching the registered destination (Address Type)
- Searching the registered destination (Detail Search)
- Specifying by direct input
- Performing an LDAP search (Search)
- Performing an LDAP search (Advanced Search)
- 2.7 Specifying multiple destinations (broadcast transmission)
- 2.8 Send a fax with Program destination
- 2.9 Checking the settings
- 2.10 Operations while scanning
- 2.11 When unable to send fax
- 2.12 Reserving the transmission
- 2.13 Stopping the transmission
- 2.14 Checking the transmission reservation job
- 2.15 Checking the communication result
- 2.16 Fax Header Settings
- 2.17 Faxing after previewing
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 List of functions on the Settings screen
- 6.2 Sending a fax after adjusting the density of background color (Background Removal)
- 6.3 Sending the fax after accentuating the text edges (Sharpness)
- 6.4 Sending the fax after erasing shadows (Frame Erase)
- 6.5 Sending double-paged originals page by page from right to left (Book Copy)
- 6.6 Sending a fax with the specified original scanning area (Scan Size)
- 6.7 Copying the original at the same time as sending the Fax (Send & Print)
- 6.8 Confirming that the original is scanned (TX Stamp)
- 6.9 Sending a fax after specifying the filename of the scanned data (Document Name)
- 6.10 Sending an original of varying sizes by a single operation (Mixed Original)
- 6.11 Sending an original with folds (Z-Folded Original)
- 6.12 Sending a long original (Long Original)
- 6.13 Specifying the binding position (Binding Position)
- 6.14 Faxing by reducing the effect of dust from the left partition glass (Despeckle)
- 6.15 Sending the fax after reconfirming the destination (Destination Check Display Function)
- 6.16 Sending a fax after specifying the E-mail Subject or Body (E-mail settings)
- 6.17 Specifying the way of adding the transmission source information (Fax Header Settings)
- 7 Useful reception functions
- 8 Registering/Settings
- 9 Utility mode
- 9.1 Utility mode operation
- 9.2 Utility mode list
- User Settings > Custom Display Settings > Fax/Scan Settings
- User Settings > Custom Display Settings > FAX Active Screen
- User Settings > Custom Display Settings > Search Option Settings
- User Settings > Scan/Fax Settings > Default Scan/Fax Settings
- Administrator Settings > System Settings > Power Save Settings
- Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings > Registering and Changing Address
- Administrator Settings > System Setting > Restrict User Access > Restrict Operation > Restrict Broadcasting
- Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After Job
- Administrator Settings > System Settings > Stamp Settings
- Administrator Settings > Administrator/Machine Settings > Administrator Registration
- Administrator Settings > Administrator/Machine Settings > Input Machine Address
- Administrator Settings > User Authentication/Account Track > Limiting Access to Destination
- Administrator Settings > Network Settings > TCP/IP Settings
- Administrator Settings > Network Settings > E-Mail Settings > E-Mail TX (SMTP)
- Administrator Settings > Network Settings > E-Mail Settings > E-Mail RX (POP)
- Administrator Settings > Network Settings > Network Fax Settings
- Administrator Settings > Network Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Header Information
- Administrator Settings > Fax Settings > Header/Footer Position
- Administrator Settings > Fax Settings > Line Parameter Settings
- Administrator Settings > Fax Settings > TX/RX Settings
- Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
- Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
- Administrator Settings > Fax Settings > Report Settings
- Administrator Settings > Fax Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Job Settings List
- Administrator Settings > Security Settings > Security Details > Manual Destination Input
- Administrator Settings > Security Settings > Security Details > Restrict Fax TX
- Administrator Settings > Security Settings > Security Details > Hide Personal Information
- Administrator Settings > Security Settings > Security Details > Display Active Log
- 9.3 Setting the initial state of Fax/Scan screen (Scan/Fax Settings) is set.
- 9.4 Setting the screen during fax operation (FAX Active Screen)
- 9.5 Specifying differentiation of uppercase/lowercase letters when searching destinations (Search Option Settings)
- 9.6 Setting initial setting value of fax function (Default Scan/Fax Settings)
- 9.7 Specifying the power save transition conditions (Enter Power Save Mode)
- 9.8 Specifying the prohibitions to cause a change in destination registration (Registering and Changing Address)
- 9.9 Setting prohibitions for sending to multiple destinations (Restrict Broadcasting)
- 9.10 Specifying whether to reset the destination and settings (Reset Data After Job)
- 9.11 Specifying stamp printing specifications (Stamp Settings)
- 9.12 Protecting the destination information (Limiting Access to Destinations)
- 9.13 Registering E-mail address of administrator (Administrator Registration)
- 9.14 Registering E-mail address of this machine (Input Machine Address)
- 9.15 Setting TCP/IP (TCP/IP Settings)
- 9.16 Specifying E-mail transmission settings (E-Mail TX (SMTP))
- 9.17 Specifying E-mail reception Settings (E-Mail RX (POP))
- 9.18 Validating Network Fax function (Network Fax Function Settings)
- 9.19 Specifying SMTP transmission and reception settings (Network Fax Settings)
- 9.20 Registering transmission source name and fax number (Header Information)
- 9.21 Specifying the method of setting the transmission source/reception information (Header/Footer Position)
- 9.22 Specifying Transmission/Reception Mode (Line Parameter Settings)
- 9.23 Settings of transmission and reception mode (TX/RX Settings)
- 9.24 Specifying Function ON/OFF Settings (Function ON/ OFF Setting)
- 9.25 Specifying memory reception settings (Memory RX Settings)
- 9.26 Specifying Report Printing Methods (Report Setting)
- 9.27 Specifying Network Fax function settings (Network Fax Settings)
- 9.28 Prohibiting the direct input of fax number (Manual Destination Input)
- 9.29 Prohibiting the fax sending function (Restrict Fax TX)
- 9.30 Specifying settings such that fax number cannot be displayed (Hide Personal Information)
- 9.31 Specifying settings such that communication history cannot be displayed (Display Activity Log)
- 10 Reports and Lists
- 10.1 Report/List Types
- 10.2 Activity Report
- 10.3 TX Result Report
- 10.4 Broadcast Report
- 10.5 Internet Fax RX Error Report
- 10.6 Print MDN Message
- 10.7 Print DSN Message
- 10.8 Print E-Mail Message Body
- 10.9 Speed Dial List (Address Book destination list)
- 10.10 Group Address List
- 10.11 Program List
- 10.12 Title/Text List
- 10.13 Fax Setting List
- 11 Appendix
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 29 |
| Size: | 255 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 102 |
| Size: | 3.18 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 Installing the printer driver
- 2.1 Printer drivers and supported operating systems
- 2.2 When used with Windows
- Automatic installation using the installer
- To install the printer driver
- Installing the printer driver using the Add Printer Wizard
- For Windows XP/Server 2003
- For Windows 2000/NT 4.0
- Installing the printer driver using Plug and Play
- For Windows 2000
- For Windows XP/Server 2003
- Uninstalling the printer driver
- When the printer driver contains the delete function
- When the printer driver does not contain the delete function
- 2.3 When used with Macintosh
- 3 Setting up network printing
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Original Orientation
- Original Size and Paper Size
- Zoom (enlargement and reduction)
- Paper Tray (paper source)
- Paper Type
- Output Method (job management)
- User Authentication
- Account Track
- Collate and Offset
- Combination/Poster Mode
- Skip Blank Pages (saving paper)
- Chapters
- Print Type (duplex printing/booklet printing)
- Image Shift
- Stapling and hole punching
- Center Staple and Fold/Fold
- Paper Arrangement
- Cover Mode and Transparency Interleave
- Per Page Setting
- Watermark
- Overlay
- Copy Protect
- Date/Time and Page Number
- Header/Footer
- Quality Adjustment
- Use Printer Fonts (substitute fonts)
- 5 Various settings
- 6 Troubleshooting
- 7 Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 20 |
| Size: | 3.64 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 56 |
| Size: | 1.36 MB |
Show table of contents
Document Outline
- Contents
- About this Product
- Trademarks and registered trademarks
- LICENSE ISSUES
- 1 Introduction
- 2 Installation of Log Management Utility
- 3 Starting Log Management Utility
- 4 Log Confirmation
- 5 Log Management Utility Settings
- 6 Error message list
| Recognized languages: | English |
|---|---|
| Pages: | 44 |
| Size: | 1.05 MB |
Show table of contents
Document Outline
- Contents
- 1 Introduction
- 2 Device description
- 3 Using Authentication Unit (Biometric Type) AU-101
- 4 Care of Authentication Unit (Biometric Type) AU-101
- 5 Specifications
- 6 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 7 |
| Size: | 1.79 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 1.49 MB |
Show table of contents
Document Outline
- Chapter01a.pdf
- Chapter02a.pdf
- 2 Device description
- 2.1 Part names and their functions
- 2 Device description
- Chapter03a.pdf
- Chapter04a.pdf
- Chapter05a.pdf
- Chapter06a.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 164 |
| Size: | 1.94 MB |
Show table of contents
Document Outline
- Introduction
- 1 Before use
- 2 Using copy functions
- 2.1 General copy operation
- 2.2 Selecting a Color setting
- 2.3 Selecting the Paper settings
- 2.4 Specifying a Zoom setting
- 2.5 Selecting document and copy settings
- 2.6 Selecting a combined copy setting
- 2.7 Selecting Finishing settings
- 2.8 Selecting not to rotate the image
- 2.9 Selecting the quality of the document
- 2.10 Selecting the density settings
- 2.11 Selecting the Paper settings
- 2.12 Scanning the next document to be copied while a copy job is being printed (next job reservation)
- 2.13 Pausing scanning/printing
- 2.14 Printing a proof to check the settings (Proof Copy)
- 3 Using fax/scan functions
- 4 Logging on and logging off
| Recognized languages: | English |
|---|---|
| Pages: | 28 |
| Size: | 1.56 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 7 |
| Size: | 352 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 68 |
| Size: | 2.43 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 189 |
| Size: | 4.94 MB |
Show table of contents
Document Outline
- Contents
- 1 Introduction
- 2 Basic operations
- 3 Authentication Manager
- 3.1 User List
- 3.1.1 Available operations in the User List page
- 3.1.2 Viewing the user list
- 3.1.3 Specifying display settings for the user list
- 3.1.4 Registering a new user
- 3.1.5 Editing user information
- 3.1.6 Editing information of multiple users
- 3.1.7 Deleting a user
- 3.1.8 Importing data
- 3.1.9 Importing from a file
- 3.1.10 Creating an import file
- 3.1.11 Creating a deletion file
- 3.1.12 Checking the import result
- 3.1.13 Importing from a device
- 3.1.14 Checking the import result
- 3.1.15 Importing from an external server
- 3.1.16 Checking the import result
- 3.1.17 Deleting a user according to the external server
- 3.1.18 Exporting data
- 3.1.19 Editing an exported file
- 3.2 User Counter
- 3.3 Account Track List
- 3.3.1 Available operations in the Account Track List page
- 3.3.2 Displaying the account track list
- 3.3.3 Registering a new account
- 3.3.4 Editing an account
- 3.3.5 Deleting an account
- 3.3.6 Importing data
- 3.3.7 Importing from a file
- 3.3.8 Creating a file to be imported
- 3.3.9 Creating a deletion file
- 3.3.10 Checking the import result
- 3.3.11 Importing from a device
- 3.3.12 Checking the import result
- 3.3.13 Exporting data
- 3.4 Account Track Counter
- 3.5 Specifying a function permission template
- 3.6 Specifying a function permission
- 3.7 Specifying a user group
- 3.8 Account Group Settings
- 3.9 Specifying a template
- 3.10 Specifying an external server
- 3.11 Managing a specific device
- 3.11.1 Editing device settings
- 3.11.2 Function Permission Setting for Public User
- 3.11.3 SSFC Authentication Settings
- 3.11.4 Specifying a list (User name)
- 3.11.5 Specifying a list (Account name)
- 3.11.6 Specifying a list (External server name)
- 3.11.7 Registering a specific device
- 3.11.8 Unregistering a specific device
- 3.11.9 Checking the result of registering or unregistering a specific device
- 3.12 IC card information
- 3.13 IC Card Authentication Setting
- 3.14 IC Card Information Template Settings
- 3.15 Biometric information
- 3.16 Bio Auth Setting
- 3.17 Biometric Authentication Server Setting
- 3.18 Changing the password
- 3.19 Checking the Biometric Unit No.
- 3.20 Specifying an administrator
- 3.21 Specifying a group manager
- 3.22 Version
- 3.23 Using with Account Manager
- Precautions for use with Account Manager
- 3.23.1 Real-time Upper Limit Settings
- 3.23.2 Operation when the Real-time Upper Limit Settings is enabled
- 3.23.3 Device panel display when logging on
- If the residual number of pages for a user is greater than the reserved number of printable pages when a user uses the device:
- If the residual number of pages by a user is smaller than the reserved number of printable pages when a user uses the device:
- If the residual number of pages by a user group is greater than the reserved number of printable pages when a user uses the device:
- 3.24 Precautions on using Gateway for Biometric Authentication Manager
- 3.25 Operation for authentication
- 3.1 User List
- 4 Setting by Purpose
- 4.1 Performing device authentication using Authentication Manager
- 4.2 Restricting available device functions by user group or user
- 4.3 Switching available functions between devices in the account track to which a user belongs and devices in other account tracks
- 4.4 Linking with an existing Active Directory for authentication
- 4.5 Simplifying authentication with IC card
- 4.6 Easily registering new card information for a user who lost an IC card
- 4.7 Easily registering a card already registered as one of other user
- 4.8 Using biometric authentication to enhance security level
- 4.9 Using Public User
- 4.10 Changing your password
- 4.11 Performing counter management by job or work besides user
- 5 Troubleshooting
| Recognized languages: | English |
|---|---|
| Pages: | 37 |
| Size: | 3.13 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 243 |
| Size: | 7.07 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 User mode
- 3 Administrator mode
- 3.1 Maintenance tab
- Meter Count
- ROM Version
- Import/Export
- Status Notification Setting
- Total Counter Notification Setting
- Machine Setting
- Online Assistance
- Date/Time Setting - Manual Setting
- Date/Time Setting - Time Adjustment Setting
- Timer Setting - Power Save Setting
- Timer Setting - Weekly Timer Setting
- Network TWAIN
- Reset - Network Setting Clear
- Reset - Reset
- Reset - Format All Destination
- External Memory Function Settings
- Header/Footer Registration
- License Settings - Get Request Code
- License Settings - Install License
- 3.2 Security tab
- Authentication - User Auth/Account Track
- Authentication - External Server Registration
- Authentication - Default Function Permission
- User Registration
- Registering a user
- Account Track Registration
- Registering an account
- SSL/TLS Setting - SSL/TLS Setting
- Creating a certificate
- Creating a certificate
- Specifying an encryption level setting
- Removing a certificate
- Specifying the modes using SSL
- Downloading certificates
- SSL/TLS Setting - Action for Invalid Certificate
- Address Reference Setting - Reference Allowed Group Registration
- Address Reference Setting - Public User Reference Setting
- Permission of Address Change
- Auto Logout
- Administrator Password Setting
- 3.3 Box tab
- 3.4 Print Setting tab
- 3.5 Store Address tab
- 3.6 Network tab
- TCP/IP Setting - TCP/IP Setting
- TCP/IP Setting - IP Filtering
- TCP/IP Setting - IPsec
- E-mail Setting - E-mail RX (POP)
- E-mail Setting - E-mail TX (SMTP)
- E-mail Setting - S/MIME
- E-mail Setting - I-Fax Advanced Setting
- LDAP Setting - LDAP Setting
- LDAP Setting - Setting Up LDAP
- IPP Setting
- FTP Setting - FTP TX Setting
- FTP Setting - FTP Server Setting
- SNMP Setting
- SMB Setting - WINS Setting
- SMB Setting - Client Setting
- SMB Setting - Print Setting
- SMB Setting - Direct Hosting Setting
- Web Service Settings - Web Service Common Settings
- Web Service Settings - Printer Settings
- Web Service Settings - Scanner Settings
- Bonjour Setting
- NetWare Setting - NetWare Setting
- NetWare Setting - NetWare Status
- AppleTalk Setting
- Network Fax Setting - SMTP TX Setting
- Network Fax Setting - SMTP RX Setting
- WebDAV Settings - WebDAV Client Settings
- WebDAV Settings - WebDAV Server Settings
- OpenAPI Setting
- TCP Socket Setting
- 3.1 Maintenance tab
- 4 Appendix
- 5 Index
| Recognized languages: | English |
|---|---|
| Pages: | 359 |
| Size: | 9.81 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview of the User Box functions
- 2 Saving documents
- 2.1 Information on saving documents
- 2.2 Authentication and user boxes that can be accessed
- When user authentication and account track settings are not specified
- When only user authentication settings are specified
- When only account track settings are specified
- When user authentication and account track settings are specified and synchronized
- When user authentication and account track settings are specified, but not synchronized
- 2.3 Saving copies in user boxes
- 2.4 Saving scans in user boxes
- 2.5 Saving printouts in user boxes
- 2.6 Specifying scan settings
- 2.7 Display and operation of the left panel
- Job List
- Job List - Delete
- Job List - Job Details
- Settings when saving documents
- Detail - Check Scan Settings
- Detail - Check Original Settings
- Settings when using documents
- Detail
- Check Job Settings
- Check Job Settings - Destination Settings
- Check Job Settings - E-Mail Settings
- Preview
- Preview - Detail
- Preview - Detail (Print/Combine)
- Preview - Detail (Send/Bind TX)
- 3 Organizing user box documents
- 4 Printing a user box document
- 4.1 Overview of document printing
- 4.2 Printing
- Available print settings
- To print a document
- Changing the number of copies
- Specifying single-sided/double-sided printing
- Specifying Finishing settings
- Adding a binding margin
- Adding cover pages (Cover Sheet)
- Adding insertions (Insert Sheet)
- Inserting chapter title pages (Chapters)
- Printing the date/time (Date/Time)
- Printing page numbers (Page Number)
- Adding preset text or images (Stamp)
- Adding text and images to prevent copying (Copy Protect)
- Adding repeated preset text or images (Stamp Repeat)
- Inserting a header/footer (Header/Footer)
- 4.3 Combined printing
- 5 Sending a user box document
- 5.1 Overview of document transmissions
- 5.2 Specifying the destination
- 5.3 Specifying the transmission settings
- Settings that can be specified
- File Type
- E-Mail Settings (Communication Settings)
- URL Notification Setting (Communication Settings)
- E-Mail Encryption (Communication Settings)
- Digital Signature (Communication Settings)
- Date/Time (Application)
- Page Number (Application)
- Stamp (Application)
- Header/Footer (Application)
- Send & Print (Application)
- 5.4 Bind TX
- 5.5 Checking settings before sending
- 6 Printing/sending a system user box document
- 7 Specifying Utility mode parameters
- 8 Appendix
- 9 Index
| Recognized languages: | English |
|---|---|
| Pages: | 427 |
| Size: | 9.39 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 Installing the printer driver
- 2.1 Printer drivers and supported operating systems
- 2.2 When used with Windows
- Automatic installation using the installer
- To install the printer driver
- Installing the printer driver using the Add Printer Wizard
- For Windows XP/Server 2003
- For Windows Vista
- When using Web service printing under Windows Vista
- For Windows 2000/NT 4.0
- Installing the printer driver using Plug and Play
- For Windows 2000
- For Windows XP/Server 2003
- For Windows Vista
- Uninstalling the printer driver
- When the printer driver contains the delete function
- When the printer driver does not contain the delete function
- 2.3 When used with Macintosh
- 3 Setting up network printing
- 3.1 Overview of network functions
- 3.2 Setting the IP address for this machine
- 3.3 Accessing PageScope Web Connection
- 3.4 SMB printing
- 3.5 LPR printing
- 3.6 Port 9100 printing (Windows 2000/XP/Server 2003/ Vista)
- 3.7 IPP printing (Windows 2000/XP/Server 2003/Vista)
- 3.8 Printing with NetWare
- Network printing in a NetWare environment
- For Remote Printer mode with NetWare 4.x bindery emulation
- For Print Server mode with NetWare 4.x bindery emulation
- For NetWare 4.x Remote Printer mode (NDS)
- For NetWare 4.x/5.x/6 Print Server mode (NDS)
- For NetWare 5.x/6 Novell Distributed Print Service (NDPS)
- Specifying client (Windows) settings when using the NetWare server
- 3.9 Printing with Macintosh
- 4 Various printing methods
- 4.1 Printing operations
- 4.2 Setting the printing functions
- Function list
- Function overview
- Original Orientation
- Original Size and Paper Size
- Zoom (enlargement and reduction)
- Paper Tray (paper source)
- Paper Type
- Output Method (job management)
- User Authentication
- Account Track
- Collate and Offset
- Combination/Poster Mode
- Skip Blank Pages (saving paper)
- Chapters
- Print Type (duplex printing/booklet printing)
- Image Shift
- Stapling and hole punching
- Center Staple and Fold/Fold
- Paper Arrangement
- Cover Mode and Transparency Interleave
- Per Page Setting
- Watermark
- Overlay
- Copy Protect
- Date/Time and Page Number
- Header/Footer
- Quality Adjustment
- Use Printer Fonts (substitute fonts)
- 4.3 Specifying the printer driver basic settings
- 5 Setting up the PCL driver (Windows)
- 5.1 Settings
- 5.2 Specifying the Basic tab settings
- 5.3 Specifying the Layout tab settings
- 5.4 Specifying the Finish tab settings
- 5.5 Specifying the Cover Mode tab settings
- 5.6 Specifying the Stamp/Composition tab settings
- 5.7 Specifying the Quality tab settings
- 5.8 Specifying the Other tab settings
- 5.9 Specifying the Configure tab settings
- 5.10 Specifying the Settings tab settings
- 5.11 Saving the driver settings
- 6 Setting up the PostScript driver (Windows)
- 6.1 Settings
- 6.2 Specifying the Basic tab settings
- 6.3 Specifying the Layout tab settings
- 6.4 Specifying the Finish tab settings
- 6.5 Specifying the Cover Mode tab settings
- 6.6 Specifying the Stamp/Composition tab settings
- 6.7 Specifying the Quality tab settings
- 6.8 Specifying the Other tab settings
- 6.9 Specifying the Configure tab settings
- 6.10 Specifying the Settings tab settings
- 6.11 Saving the driver settings
- 7 Setting up the PPD driver (Mac OS 9.2)
- 8 Setting up the PPD driver (Mac OS X)
- 9 Function detail description
- 9.1 Proof print
- 9.2 Secure print
- 9.3 Save in User Box
- 9.4 Printing on a machine with the user authentication set up
- 9.5 Printing with the machine enabling the Account Track function
- 9.6 ID & Print
- 9.7 Specifying a user-defined encryption passphrase
- 9.8 ICC profile settings
- 9.9 Registering ICC profiles in the printer driver
- 10 Various settings
- 10.1 Print settings in Utility mode
- Default settings
- To display the User Settings screen
- PDL Setting
- Number of Copies
- Original Direction
- Spool setting
- Paper size change
- Banner Sheet Setting
- Binding Direction Adjustment
- Line Width Adjustment
- Paper Tray
- Paper Size
- 2-Sided Print
- Binding Position
- Staple
- Punch
- Banner Paper Tray
- Font Settings
- Symbol Set
- Font Size
- Line/Page
- CR/LF Mapping
- Print PS Errors
- ICC Profile Settings
- Verify XPS Digital Signature
- Print Reports
- 10.2 Print settings in Administrator mode
- To display the Administrator Settings screen
- Print/Fax Output Setting
- Output Tray Setting
- To delete secure print documents
- To specify the secure document delete time
- To specify the ID & Print Delete Time
- ID & Print Settings
- ID & Print Operation Settings
- Printing without specifying the authentication setting
- I/F Timeout
- Print XPS Errors
- Authentication Setting for the OpenAPI Settings
- Print Data Capture
- Driver Password Encryption Setting
- 10.1 Print settings in Utility mode
- 11 Troubleshooting
- 12 Appendix
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 9.47 MB |
Show table of contents
Document Outline
- Contents
- 1 Security
- 2 Administrator Operations
- 2.1 Accessing the Administrator Settings
- 2.2 Enhancing the Security Function
- 2.3 Preventing Unauthorized Access
- 2.4 Canceling the Operation Prohibited State
- 2.5 Setting the Authentication Method
- 2.6 System Auto Reset Function
- 2.7 User Setting Function
- 2.8 Account Track Setting Function
- 2.9 User Box Function
- 2.10 Changing the Administrator Password
- 2.11 Protecting Data in the HDD
- 2.12 Overwrite All Data Function
- 2.13 SSL Setting Function
- 2.14 S/MIME Communication Setting Function
- 2.15 SNMP Setting Function
- 2.16 TCP/IP Setting Function
- 2.17 NetWare Setting Function
- 2.18 SMB Setting Function
- 2.19 AppleTalk Setting Function
- 2.20 E-Mail Setting Function
- 3 User Operations
- 4 Application Software
| Recognized languages: | English |
|---|---|
| Pages: | 491 |
| Size: | 11.35 MB |
Show table of contents
Document Outline
- Contents
- Introduction
- Special Notice to User
- Send a fax (Faxing)
- Available features
- Attaching and sending the total page count
- Sending a fax at a specified time
- Sending one scanned page at a time (Quick Memory TX)
- Overseas faxing
- Confirming whether the original has been scanned or not
- Erasing shadows
- Specifying a scanning area size on the original
- Sending originals of different sizes with one operation
- Sending an original with fold lines
- Sending long originals
- Sending double-paged originals
- Specifying the binding position of double-sided originals
- Sending faxes by command from the recipient
- Releasing ECM mode
- Specifying an original for polling
- Releasing Super G3 Mode
- Specifying a relay destination
- Using a confidential box
- Sending password-protected faxes
- Adjusting the background color density
- Emphasizing character edges
- Saving to a box
- Explanation of manual conventions
- Descriptions of original documents and paper
- User’s guides
- 1 Before using this machine
- 2 To send a fax
- 2.1 General fax operation
- 2.2 Loading the original
- 2.3 Specifying scanning conditions
- 2.4 Specifying only one destination
- Specifying from registered destinations
- Searching for a registered destination (Index button)
- Searching for a registered destination (Address Type)
- Searching for registered destinations (Detail Search)
- Specifying by direct input
- Specifying from the job history
- Performing an LDAP search (Search)
- Performing an LDAP search (Advanced Search)
- 2.5 Specifying multiple destinations (Sequential broadcast transmission or broadcast transmission)
- 2.6 Sending a fax using a program destination
- 2.7 Checking the settings
- 2.8 Operations while scanning
- 2.9 When unable to send fax
- 2.10 Reserving a transmission
- 2.11 Sending a fax while confirming the status of the recipient’s machine (Manual transmission).
- 2.12 Aborting transmission
- 2.13 Checking reserved jobs to be transmitted
- 2.14 Checking transmission results
- 2.15 Memory transmission and quick memory transmission
- 2.16 Attaching the total page count to a sent fax (Total # of Pages)
- 2.17 Sending a fax after specifying a time (Timer TX)
- 2.18 Faxing overseas (Overseas TX)
- 2.19 Fax Header Settings
- 2.20 Faxing after previewing
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 List of functions on the Settings screen
- 6.2 Sending a fax after adjusting the density of background color (Background Removal)
- 6.3 Sending the fax after emphasizing the character edges (Sharpness)
- 6.4 Sending the fax after removing the black shadow (Frame Erase)
- 6.5 Sending double page originals page by page from right to left (Book Copy)
- 6.6 Sending a fax after specifying the scan size of the original (Scan Size)
- 6.7 Copying the original at the same time as sending the Fax (Send & Print)
- 6.8 Confirming that the original is scanned (TX Stamp)
- 6.9 Sending an original of varying sizes by a single operation (Mixed Original)
- 6.10 Sending an original with folds (Z-Folded Original)
- 6.11 Sending a long original (Long Original)
- 6.12 Specifying the binding position (Binding Position)
- 6.13 Faxing by reducing the effect of dust from the left partition glass (Despeckle)
- 6.14 Sending a fax after cancelling ECM mode (ECM OFF)
- 6.15 Sending a fax after cancelling Super G3 mode (V. 34 OFF)
- 6.16 Sending an original in Public/Personal/Group box by fax
- 6.17 Check the recipient’s machine and send the fax (Check Dest. & Send)
- 6.18 Sending the fax after reconfirming the destination (Destination Check Display Function)
- 6.19 Sending the fax after specifying the telephone line (Select Line settings)
- 6.20 Sending the fax with the password (Password TX)
- 6.21 Confidential transmission (F-Code TX)
- 6.22 Sending the fax after specifying the relay destination (F-Code TX)
- 6.23 Specifying the way of adding the transmission source information (Fax Header Settings)
- 7 Useful reception functions
- 8 Polling
- 9 Registering/Specifying Settings
- 9.1 Displaying the fax registration screen
- 9.2 Registering the Address Book
- 9.3 Registering Group destinations
- 9.4 Registering Program destinations
- 9.5 Changing the destination level (Apply Levels/Groups to Destinations)
- 9.6 Confidential box settings
- 9.7 Specifying bulletin board settings
- 9.8 Specifying Relay box settings
- 9.9 Setting Memory RX User Box
- 10 Utility mode
- 10.1 Utility mode operation
- 10.2 Utility mode list
- User Settings > Custom Display Settings > Scan/Fax Settings
- User Settings > Custom Display Settings > FAX Active Screen operation
- User Settings > Custom Display Settings > Search Option Settings
- User Settings > Scan/Fax Settings > Default Scan/Fax Settings
- Administrator Settings > System Settings > Power Save Settings
- Administrator Settings > System Settings > Output Settings > Print/Fax Output Settings
- Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings > Registering and Changing Address
- Administrator Settings > System Settings > Restrict User Access > Restrict Operation > Restrict Broadcasting
- Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After Job
- Administrator Settings > System Settings > Stamp Settings
- Administrator Settings > User Authentication/Account Track > Limiting Access to Destinations
- Administrator Settings > Fax Settings > Header Information
- Administrator Settings > Fax Settings > Header/Footer Position
- Administrator Settings > Fax Settings > Line Parameter Settings
- Administrator Settings > Fax Settings > TX/RX Settings
- Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
- Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
- Administrator Settings > Fax Settings > Function Settings > Closed Network RX
- Administrator Settings > Fax Settings > Function Settings > Forward TX Setting
- Administrator Settings > Fax Settings > Function Settings > Incomplete TX Hold
- Administrator Settings > Fax Settings > Function Settings > PC-FAX RX Setting
- Administrator Settings > Fax Settings > Function Settings > TSI User Box Setting
- Administrator Settings > Fax Settings > PBX Connection Setting
- Administrator Setting > Fax Setting > Report Settings
- Administrator Settings > Fax Settings > Job Settings List
- Administrator Settings > Fax Settings > Multi Line Settings > Line Parameter Setting
- Administrator Settings > Fax Settings > Multi Line Settings > Function Settings
- Administrator Settings > Fax Setting > Multi Line Settings > Multi Line Settings
- Administrator Settings > Fax Settings > Multi Line Settings > Sender Fax No.
- Administrator Settings > Security Settings > Security Details > Manual Destination Input
- Administrator Settings > Security Settings > Security Details > Restrict Fax TX
- Administrator Settings > Security Settings > Security Details > Hide Personal Information
- Administrator Settings > Security Settings > Security Details > Display Activity Log
- 10.3 Setting the initial state of Fax/Scan screen (Scan/Fax Settings)
- 10.4 Setting the screen during fax operation (FAX Active Screen)
- 10.5 Specifying differentiation of uppercase/lowercase letters when searching destinations (Search Option Settings)
- 10.6 Setting initial setting value of fax function (Default Scan/Fax Setting)
- 10.7 Specifying the power save transition conditions (Enter Power Save Mode)
- 10.8 Setting the printing method for received original (Print/Fax Output Settings)
- 10.9 Specifying the prohibitions to cause a change in destination registration (Registering and Changing Addresses)
- 10.10 Setting prohibitions for sending a fax to multiple destinations (Restrict Broadcasting)
- 10.11 Specifying whether to reset the destination and settings (Reset Data After Job)
- 10.12 Specifying stamp printing specifications (Stamp Settings)
- 10.13 Protecting the destination information (Limiting Access to Destinations)
- 10.14 Registering transmission source name and fax number (Header Information)
- 10.15 Specifying the method of setting the transmission source/reception information (Header/Footer Position)
- 10.16 Specifying transmission/ receiving mode (Line Parameter Settings)
- 10.17 Settings of transmission and reception mode (TX/RX Settings)
- 10.18 Specifying the ON/OFF settings of the function (Function ON/OFF Setting)
- 10.19 Specifying memory reception settings (Memory RX Settings)
- 10.20 Reception settings only for the specific caller (Closed Network RX)
- 10.21 Forwarding the received original (Forward TX Setting)
- 10.22 Specifying the resending (Incomplete TX Hold)
- 10.23 Specifying the reception in box of hard disk (PC-FAX RX Setting)
- 10.24 Distributing the received original per sender (TSI User Box Setting)
- 10.25 Specifying the function related to private branch exchange (PBX Connection Setting)
- 10.26 Specifying the printing methods for report (Report Setting)
- 10.27 Specifying the extended telephone line parameter settings (Lines Parameter Setting)
- 10.28 Specifying the extended telephone line function settings (Function Settings)
- 10.29 Specifying the communication methods of Extended telephone lines (Multi Line Settings)
- 10.30 Specifying the fax number of Extended telephone line (Sender Fax No.)
- 10.31 Prohibiting the direct input of fax number (Manual Destination Input)
- 10.32 Prohibiting the Fax sending function (Restrict Fax TX)
- 10.33 Specifying settings such that fax number cannot be displayed (Hide Personal Information)
- 10.34 Specifying settings such that communication history cannot be displayed (Display Activity Log)
- 11 Reports and Lists
- 11.1 Report / List Types
- 11.2 Activity Report
- 11.3 TX Result Report
- 11.4 Polling TX Report
- 11.5 Polling RX Report
- 11.6 Sequential Polling RX Report
- 11.7 Reservation Communication Report
- 11.8 Reservation Polling TX Report
- 11.9 Broadcast Reserved Report
- 11.10 An address Polling RX Reserved Report
- 11.11 Sequence Polling Rx Reserved Report
- 11.12 Confidential RX Report
- 11.13 Bulletin board transmission report (Polling TX Report)
- 11.14 Relay TX Result Report
- 11.15 Relay Request Report
- 11.16 PC-FAX TX Error Report
- 11.17 Broadcast Report
- 11.18 Speed Dial List (Address Book destination list)
- 11.19 Group Address List
- 11.20 Program List
- 11.21 Fax Setting List
- 12 Appendix
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 3 |
| Size: | 1.45 MB |
| Recognized languages: | English |
|---|---|
| Pages: | 82 |
| Size: | 3.00 MB |
Show table of contents
Document Outline
- Introduction
- 1 Overview
- 2 Assignment of application keys
- 3 Web browser function
- 4 PageScope Web Connection (Web browser function)
- 5 Image Panel
- 6 Photo registration
- 7 PDF process functions
- 8 My Panel functions
- 8.1 Overview
- 8.2 Displaying My Panel
- 8.3 Customizing My Panel
- 9 My Address Book function
- 10 Index
| Recognized languages: | English |
|---|---|
| Pages: | 415 |
| Size: | 9.19 MB |
Show table of contents
Document Outline
- Introduction
- 1 Before using scanning functions
- 2 Scanning
- 2.1 Control panel
- 2.2 Fax/Scan mode screen
- 2.3 Display and operation of the left panel
- 2.4 Previewing
- 2.5 Using Scan/Fax programs
- 2.6 Sending data in an e-mail message (Scan to E-Mail)
- 2.7 Sending data to a computer on the network (Scan to SMB)
- 2.8 Sending data to a server (Scan to FTP)
- 2.9 Sending data to a server (WebDAV)
- 2.10 Using Web Service
- 2.11 Specifying scan and transmission settings (Scan Settings/Original Settings/Communication Settings)
- Settings that can be specified
- Original Type
- Simplex/Duplex
- Resolution
- File Type
- Density
- Separate Scan
- Color (Quality Adjustment)
- Background Removal (Quality Adjustment)
- Sharpness (Quality Adjustment)
- Frame Erase (Erase)
- Book Copy (Book Scan)
- Scan Size (Application)
- Annotation (Application)
- Date/Time (Application)
- Page Number (Application)
- Stamp (Application)
- Header/Footer (Application)
- Send & Print (Application)
- Document Name
- Original Settings
- E-Mail Setting
- URL Notification Setting
- E-Mail Encryption
- Digital Signature
- 3 Specifying Utility mode parameters
- 3.1 Settings that can be specified from Utility mode
- 3.2 Displaying settings screens
- 3.3 Registering an address book destination
- 3.4 Registering a group destination
- 3.5 Specifying e-mail settings
- 3.6 Limiting Access to Destinations
- 3.7 Custom Display Settings
- 3.8 Scan/Fax Settings
- 3.9 Reset Data After Job
- 3.10 Header/Footer Settings
- 3.11 Printing registered destination lists
- 3.12 Open API Settings
- 4 Network Settings
- 4.1 Available Network Settings parameters
- 4.2 Network settings with external server authentication
- 4.3 TCP/IP Settings
- 4.4 NetWare Settings
- 4.5 http Server Settings
- 4.6 FTP Settings
- 4.7 SMB Settings
- 4.8 LDAP Settings
- 4.9 E-Mail TX (SMTP)
- 4.10 E-Mail RX (POP)
- 4.11 S/MIME Communication Settings
- 4.12 SNMP Settings
- 4.13 AppleTalk Settings
- 4.14 Bonjour Settings
- 4.15 TCP Socket Settings
- 4.16 WebDAV Client Settings
- 4.17 WebDAV Server Settings
- 4.18 Web Service Settings
- 4.19 Device Setting
- 4.20 Time Adjustment Setting
- 4.21 Status Notification Setting
- 4.22 Total Counter Notification Settings
- 4.23 PING Confirmation
- 4.24 SLP Setting
- 4.25 LPD Setting
- 4.26 Prefix/Suffix Setting
- 4.27 Action for Invalid Certificate
- 5 Scan function troubleshooting
- 6 Appendix
- 7 Index
| Recognized languages: | English |
|---|---|
| Pages: | 399 |
| Size: | 10.70 MB |
Show table of contents
Document Outline
- Contents
- Introduction
- Special Notice to User
- Available features
- Confirming whether the original is scanned or not
- Sending after erasing shadows
- Specifying a scanning area size on the original
- Sending originals of different sizes with one operation
- Sending an original with fold lines
- Sending long originals
- Sending double-paged originals
- Specifying the binding position of double-sided originals
- Sending after adjusting the density of background color
- Sending after emphasizing character edges
- Sending a color fax
- Prohibiting the print out of received originals (Memory RX function)
- Explanation of manual conventions
- Descriptions of original documents and paper
- User’s guides
- 1 Before use
- 2 Transmission
- 2.1 General fax operation (Internet Fax)
- 2.2 General fax operation (IP Address Fax)
- 2.3 Loading the original
- 2.4 Specifying transmission color settings (IP Address Fax)
- 2.5 Specifying the scan conditions
- 2.6 Specifying only one destination
- Specifying from registered destination
- Searching the registered destination (Search text button)
- Searching the registered destination (Address Type)
- Searching the registered destination (Detail Search)
- Specifying by direct input
- Performing an LDAP search (Search)
- Performing an LDAP search (Advanced Search)
- 2.7 Specifying multiple destinations (broadcast transmission)
- 2.8 Send a fax with Program destination
- 2.9 Checking the settings
- 2.10 Operations while scanning
- 2.11 When unable to send fax
- 2.12 Reserving the transmission
- 2.13 Stopping the transmission
- 2.14 Checking the transmission reservation job
- 2.15 Checking the communication result
- 2.16 Fax Header Settings
- 2.17 Faxing after previewing
- 3 Reception
- 4 Troubleshooting
- 5 Specifications
- 6 Useful transmission functions
- 6.1 List of functions on the Settings screen
- 6.2 Sending a fax after adjusting the density of background color (Background Removal)
- 6.3 Sending the fax after accentuating the text edges (Sharpness)
- 6.4 Sending the fax after erasing shadows (Frame Erase)
- 6.5 Sending double-paged originals page by page from right to left (Book Copy)
- 6.6 Sending a fax with the specified original scanning area (Scan Size)
- 6.7 Copying the original at the same time as sending the Fax (Send & Print)
- 6.8 Confirming that the original is scanned (TX Stamp)
- 6.9 Sending a fax after specifying the filename of the scanned data (Document Name)
- 6.10 Sending an original of varying sizes by a single operation (Mixed Original)
- 6.11 Sending an original with folds (Z-Folded Original)
- 6.12 Sending a long original (Long Original)
- 6.13 Specifying the binding position (Binding Position)
- 6.14 Faxing by reducing the effect of dust from the left partition glass (Despeckle)
- 6.15 Sending the fax after reconfirming the destination (Destination Check Display Function)
- 6.16 Sending a fax after specifying the E-mail Subject or Body (E-mail settings)
- 6.17 Specifying the way of adding the transmission source information (Fax Header Settings)
- 7 Useful reception functions
- 8 Registering/Settings
- 9 Utility mode
- 9.1 Utility mode operation
- 9.2 Utility mode list
- User Settings > Custom Display Settings > Fax/Scan Settings
- User Settings > Custom Display Settings > FAX Active Screen
- User Settings > Custom Display Settings > Search Option Settings
- User Settings > Scan/Fax Settings > Default Scan/Fax Settings
- Administrator Settings > System Settings > Power Save Settings
- Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings > Registering and Changing Address
- Administrator Settings > System Setting > Restrict User Access > Restrict Operation > Restrict Broadcasting
- Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After Job
- Administrator Settings > System Settings > Stamp Settings
- Administrator Settings > Administrator/Machine Settings > Administrator Registration
- Administrator Settings > Administrator/Machine Settings > Input Machine Address
- Administrator Settings > User Authentication/Account Track > Limiting Access to Destination
- Administrator Settings > Network Settings > TCP/IP Settings
- Administrator Settings > Network Settings > E-Mail Settings > E-mail TX (SMTP)
- Administrator Settings > Network Settings > E-Mail Settings > E-mail RX (POP)
- Administrator Settings > Network Settings > Network Fax Settings > Network Fax Function Settings
- Administrator Settings > Network Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Header Information
- Administrator Settings > Fax Settings > Header/Footer Position
- Administrator Settings > Fax Settings > Line Parameter Settings
- Administrator Settings > Fax Settings > TX/RX Settings
- Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
- Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
- Administrator Settings > Fax Settings > Report Settings
- Administrator Settings > Fax Settings > Network Fax Settings
- Administrator Settings > Fax Settings > Job Settings List
- Administrator Settings > Security Settings > Security Details > Manual Destination Input
- Administrator Settings > Security Settings > Security Details > Restrict Fax TX
- Administrator Settings > Security Settings > Security Details > Hide Personal Information
- Administrator Settings > Security Settings > Security Details > Display Active Log
- 9.3 Setting the initial state of Fax/Scan screen (Scan/Fax Settings) is set
- 9.4 Setting the screen during fax operation (FAX Active Screen)
- 9.5 Specifying differentiation of uppercase/lowercase letters when searching destinations (Search Option Settings)
- 9.6 Setting initial setting value of fax function (Default Scan/Fax Settings)
- 9.7 Specifying the power save transition conditions (Enter Power Save Mode)
- 9.8 Specifying the prohibitions to cause a change in destination registration (Registering and Changing Address)
- 9.9 Setting prohibitions for sending to multiple destinations (Restrict Broadcasting)
- 9.10 Specifying whether to reset the destination and settings (Reset Data After Job)
- 9.11 Specifying stamp printing specifications (Stamp Settings)
- 9.12 Protecting the destination information (Limiting Access to Destinations)
- 9.13 Registering E-mail address of administrator (Administrator Registration)
- 9.14 Registering E-mail address of this machine (Input Machine Address)
- 9.15 Setting TCP/IP (TCP/IP Settings)
- 9.16 Specifying E-mail transmission settings (E-Mail TX (SMTP))
- 9.17 Specifying E-mail reception (E-Mail RX (POP)) Settings
- 9.18 Validating Network Fax function (Network Fax Function Settings)
- 9.19 Specifying SMTP transmission and reception settings (Network Fax Settings)
- 9.20 Registering transmission source name and fax number (Header Information)
- 9.21 Specifying the method of setting the transmission source/reception information (Header/Footer Position)
- 9.22 Specifying Transmission/Reception Mode (Line Parameter Settings)
- 9.23 Settings of transmission and reception mode (TX/RX Settings)
- 9.24 Specifying Function ON/OFF Settings (Function ON/ OFF Setting)
- 9.25 Specifying memory reception settings (Memory RX Settings)
- 9.26 Specifying Report Printing Methods (Report Setting)
- 9.27 Specifying Network Fax function settings (Network Fax Settings)
- 9.28 Prohibiting the direct input of fax number (Manual Destination Input)
- 9.29 Prohibiting the fax sending function (Restrict Fax TX)
- 9.30 Specifying settings such that fax number cannot be displayed (Hide Personal Information)
- 9.31 Specifying settings such that communication history cannot be displayed (Display Activity Log)
- 10 Reports and Lists
- 10.1 Report/List Types
- 10.2 Activity Report
- 10.3 TX Result Report
- 10.4 Broadcast Report
- 10.5 Internet Fax RX Error Report
- 10.6 Print MDN Message
- 10.7 Print DSN Message
- 10.8 Print E-Mail Message Body
- 10.9 Speed Dial List (Address Book destination list)
- 10.10 Group Address List
- 10.11 Program List
- 10.12 Title/Text List
- 10.13 Fax Setting List
- 11 Appendix
- 12 Index