Konica Minolta bizhub C550 - Manual (Page 263)

Utility mode 9
C550 9-13
Administrator Settings > Network Settings > Network Fax Settings
The items related to SMTP transmission and reception of IP address fax are
set. (page 9-65)
Administrator Settings > Fax Settings > Header Information
Sender name and fax number are registered. (page 9-69)
Item Description Values that can be set
SMTP
TX Set-
tings Port No. The port number at the time
of SMTP transmission is set. 1 - 65535 (25*)
The port number setting is
valid only when IP address
fax is used.
Connection
Timeout Connection timeout at the
time of SMTP transmission
is set. 30 - 300 Seconds (60 sec-
onds*)
SMTP RX Settings Whether or not to use the
SMTP function is set. ON*/OFF
Port No. The port number at the time
of SMTP reception is set. 1 - 65535 (25*)
The port number setting is
valid only when IP address
fax is used.
Connection
timeout Connection timeout at the
time of SMTP reception is
set. 5 - 1000 Seconds (300 sec-
onds*)
Item Description Values that can be set
Sender Multiple sender names can
be registered to be output to
the documents sent to the
receiver as sender informa-
tion. Within 30 single byte char-
acters
Sender Fax No. Registered fax number is
printed on the documents
received by the recipient as
Header information. Gener-
ally fax number of the ma-
chine is entered.
Even in case of IP address
fax, the fax number regis-
tered as G3 fax is notified to
recipient as transmission
source information. Within 20 characters using 0
- 9, +, space, * and #