Konica Minolta bizhub C550 - Manual (Page 158)

Useful transmission functions 6
C550 6-14
– For North America models (Inch)
For setting the Frame erase values in North American models (Inch)
with fraction display, touch [
], change the numerator and de-
nominator and the touch [-], [+].
To set the frame erase values for numeric display in North American
models (Inch), press keypad or [-] and [+]. “Input Error” is displayed
when a numerical value outside the range is input. When “Input Er-
ror” is displayed or when there is any mistake while entering the de-
letion width, press [C] (clear) key and enter the value again.
For details on switching between decimal and fraction values, refer
to “User’s Guide [Copy Operations]”.
– Touch [No] to cancel the frame erase settings.
6
Touch [OK].
Returns to Erase screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen.
9
Set other functions if required.
– For details on Scan Settings, refer to “Specifying the scan condi-
tions” on page 2-20 or “Scan Settings” on page 6-2.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
10
Specify the destination.