4 registering the basic information, 1 to begin operation, 1 environment and device requirements – Konica Minolta BIZHUB C652DS User Manual
Page 45: 2 network connection and settings, Connection to network, Registering the basic information, To begin operation -2, Environment and device requirements -2, 4registering the basic information
bizhub C652/C652DS/C552/C552DS/C452
4-2
4.1
To begin operation
4
4
Registering the basic information
This section explains the necessary settings and registrations before using the fax and scan functions of this
machine.
4.1
To begin operation
The following registrations are required in order to use this machine.
4.1.1
Environment and device requirements
The following environment and devices must be prepared to use various functions of this machine.
4.1.2
Network connection and settings
Connection to the network and the network settings are required to use the function of this machine that
sends image data over the network, such as the Network Scan and Network Fax functions.
Connection to network
Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.
Functions
Environment and device
Network scan function
•
Connection to network
•
Network settings
G3 fax function
•
Optional fax kit FK-502 installed
•
Connection of modular cable
Network fax function
Internet Fax
•
Connection to network
•
Network settings
IP Address Fax
•
Optional fax kit FK-502 installed
•
Connection to network
•
Network settings