Konica Minolta BIZHUB C652DS - Manual (Page 125)

bizhub C652/C652DS/C552/C552DS/C452 6-7
6.6 Printing upon data reception 6
6.6 Printing upon data reception
When a document is received, the paper size of the received document is compared with the paper size in
the paper tray, and the document is printed either by being reduced to the specified zoom ratio, or to the size
that the document fits the paper size to be printed. If the machine is configured to print received documents
in the same magnification, received documents are printed in full size regardless the paper size setting of the
received documents.
6.6.1 Printing at reduced size
When a standard-size document is received, it is printed according to the zoom ratio specified for the paper
size. (Default: 96%)
d
Reference
For details on the zoom ratio setting, refer to page 10-18.
6.6.2 Printing at reduced size to fit the paper size to be printed
If a document size longer than the standard size is received, the optimal paper size is determined based on
the width and length of the received document and printed accordingly. If the optimal-size paper is not
loaded in the paper tray, the document size is reduced to the near-size paper.
The following describes the procedure to determine the optimal paper size and criteria for selecting the paper
size.
Original Received document
Reduced
according
to the [Min.
Reduction
for RX Print]
setting
Original Received document
Reduced to
fit onto pa-
per