Konica Minolta BIZHUB C652DS - Manual (Page 117)

bizhub C652/C652DS/C552/C552DS/C452 5-67
5.13 Redialing (G3/IP) 5
5.13 Redialing (G3/IP)
Redialing refers to the operation to dial to the same destination again.
If a fax cannot be sent for example because the recipient's line is busy, the machine redials after a specified
period has elapsed.
5.13.1 Auto redialing
If a fax cannot be sent, for example because the recipient's line is busy, the machine automatically redials
the same destination for the number of redials specified in Line Parameter Setting.
The transmission job is handled as reserved job for redialing before the job is redialed.
Reference
- The auto redial count and interval are specified as shown below by factory default. For details on
specifying the number of auto redials, refer to page 10-17.
US model: Only once after 3 minutes have lapsed
European model: 3 times at 3-minute intervals
5.13.2 Manual redialing
Redialing of a job for which the status is set to pending for redial, can be performed from the Job Details
screen.
Press the [Send] tab in [Job List] - [Job Details], select a job which status is "Waiting To Redial", and press
[Redial].