Konica Minolta BIZHUB C652DS - Manual (Page 139)

bizhub C652/C652DS/C552/C552DS/C452 7-8
7.7 Bulletin (G3) 7
7.7 Bulletin (G3)
A function to register a bulletin board, and to register a posting documents to be viewed. To register a bulletin
board, first register the Bulletin Board User Box, and then save the document using the User Box mode.
Documents posted on the bulletin board can be taken out, deleted or printed by accessing through the
Bulletin Board User Box.
d
Reference
For details on registering and operating the Bulletin Board User Box, refer to the "User's Guide [Box
Operations]".
7.8 Fax transmission using extension lines (G3)
If two units of the fax kit FK-502 are installed, different functionality can be specified to the second line by
configuring separately. The following shows the available functions.
- Line Parameter Setting: The dialing scheme, number of incoming rings, and line monitoring sound can
be specified.
- Function Settings: Configures PC-FAX transmission settings.
- Multi Line Settings: Role of the line such as TX Only and RX Only can be assigned.
- Sender Fax No.: Sender fax ID can be assigned to the extension line individually.
Reference
- These functions can be specified in [Fax Settings] - [Multi Line Settings] in Administrator Settings. For
details, refer to page 10-29.
7.9 Fax forwarding (G3)
Received documents can be forwarded to the pre-set destination. The following shows the available
functions.
- This machine can be configured so that it forwards the document and prints the same document.
- If two units of fax kit FK-502 are installed, this setting can be specified for each line.
Reference
- These functions can be specified in [Fax Settings] - [Function Settings] - [Fax Forwarding Settings] in
Administrator Settings. For details, refer to page 10-23.
Bulletin board
Browse
Register
Polling