10 administrator mode settings, 1 configuration before use, 1 e-mail – Konica Minolta BIZHUB C652DS User Manual
Page 191: 2 user box, 3 smb, 4 ftp, 5 g3 fax, Administrator mode settings, Configuration before use -2, E-mail -2
bizhub C652/C652DS/C552/C552DS/C452
10-2
10.1
Configuration before use
10
10
Administrator Mode Settings
Configure Fax/Scan settings in the Administrator mode.
10.1
Configuration before use
10.1.1
Before using E-mail transmission or Internet Fax, configure the following items. This section introduces basic
items. Also refer to the "User's Guide [Network Administrator]" for details.
-
The E-mail address of the administrator
-
TCP/IP Settings
-
E-Mail TX (SMTP)
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.2
User Box
Before saving data in User Boxes, configure the following items. For details on saving data in a User Box,
refer to the "User's Guide [Box Operations]".
-
Create User Box
d
Reference
For details on the procedure for configuring settings for it, refer to the "User's Guide [Box Operations]".
10.1.3
SMB
Before using SMB transmission, configure the following items. This section introduces basic items. Also refer
to the "User's Guide [Network Administrator]" for details.
-
TCP/IP Settings
-
SMB Client Setting
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.4
FTP
Before using FTP transmission, configure the following items. This section introduces basic items. Also refer
to the "User's Guide [Network Administrator]" for details.
-
TCP/IP Settings
-
FTP Settings
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.5
G3 Fax
Before using G3 Fax, configure the following items.
-
Header Information
–
-
Line Parameter Setting
–