beautypg.com

F-code tx, 5 e-mail encryption (e-mail), 6 digital signature (e-mail) – Konica Minolta BIZHUB C652DS User Manual

Page 115: F-code tx -65, E-mail encryption (e-mail) -65, Digital signature (e-mail) -65, P. 5-65), Digital signature (p. 5-65)

background image

bizhub C652/C652DS/C552/C552DS/C452

5-65

5.12

Communication Settings

5

Reference

-

For the bulletin board number, enter the box number between 1 to 999999999 of the Bulletin Board
User Box that has been registered in advance.

-

Only one document can be saved in a single bulletin board.

-

You can create up to 10 bulletin boards for this machine.

d

Reference

For details on deleting or checking documents in the Bulletin Board User Box, refer to the "User's Guide [Box
Operations]".

F-Code TX

This function allows you send documents to a specific User Box of the remote machine by entering the SUB
address and the password. Specific User Boxes include the followings.

-

Confidential transmission

Documents are sent to the Confidential RX User Box of the remote machine. Enter the destination User
Box number in the SUB Address box and the confidential transmission password in the Password box.

-

Relay transmission

Documents are sent to the Relay Distribution User Box of the remote machine when the remote
machine supports the relay distribution function. Enter the Relay Distribution User Box number in the
SUB Address box and the password in the Password box.

Reference

-

To use the F-Code for transmission, the remote machine must support the F-Code function.

5.12.5

E-Mail Encryption (E-mail)

This item is displayed when "ON" is selected in "S/MIME Communication Settings" of Administrator Settings
- "Network Settings" - [E-mail Settings]. Specify whether to encrypt E-mails to be sent from this machine.

d

Reference

For details on the S/MIME Communication Settings, refer to the "User's Guide [Network Administrator]".

5.12.6

Digital Signature (E-mail)

This item is displayed when "ON" is selected in "S/MIME Communication Settings" of Administrator Settings
- "Network Settings" - [E-mail Settings]. Select whether to add a digital signature to E-mails to be sent from
this machine.

Reference

-

You may not be able to add a digital signature or you may be forced to add a digital signature
depending on the S/MIME communication settings.

d

Reference

For details on the S/MIME Communication Settings, refer to the "User's Guide [Network Administrator]".

This manual is related to the following products: