7 fax settings - header/footer position, 8 fax settings - line parameter setting (ip), Number of redials – Konica Minolta BIZHUB C652DS User Manual
Page 223: Redial interval, 9 fax settings - tx/rx settings, 10 fax settings - function settings, Memory rx setting, Fax settings - header/footer position -34, Fax settings - tx/rx settings -34
bizhub C652/C652DS/C552/C552DS/C452
10-34
10.5
Administrator Settings (IP/I-FAX)
10
10.5.7
Fax Settings - Header/Footer Position
Reference
-
For IP Address Fax in the color mode, reception information is not available for [Outside Body Text].
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.
d
Reference
For the setting procedure, refer to page 10-15.
10.5.8
Fax Settings - Line Parameter Setting (IP)
Number of Redials
d
Reference
For the setting procedure, refer to page 10-17.
Redial Interval
d
Reference
For the setting procedure, refer to page 10-17.
10.5.9
Fax Settings - TX/RX Settings
Reference
-
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to [Auto].
-
The available tray types vary depending on the options that are installed.
-
To receive a fax in the color mode, documents are always recorded in full size for IP address fax, and
recorded after being reduced to the appropriate print paper size for Internet fax.
-
To receive a fax in the color mode, Print Separate Fax Pages cannot be used.
d
Reference
For the setting procedure, refer to page 10-18.
10.5.10
Fax Settings - Function Settings
Function ON/OFF Setting - Destination Check Display Function
d
Reference
For the setting procedure, refer to page 10-21.
Memory RX Setting
d
Reference
For the setting procedure, refer to page 10-22.