Konica Minolta BIZHUB C652DS - Manual (Page 189)

bizhub C652/C652DS/C552/C552DS/C452 9-26
9.3 User Settings 9
2/2 page
TWAIN Lock Time Specify the length of time until the machine operations are unlocked during
scanning (excluding push scanning). (Default: 120 sec.)
•
To use the machine as a scanner from an application using TWAIN, install
the "KONICA MINOLTA TWAIN" driver software designed for that pur-
pose. For details, refer to the TWAIN driver manual in the bizhub C652 se-
ries CD.
• This function is not available if the optional image controller IC-412 v1.1
is installed.
Default Scan/Fax Set-
tings Configure the default settings (settings selected when [Reset] is pressed) for
the Fax/Scan mode screen.
Item Description
Compact PDF/XPS Com-
pression Level
(E-mail/Box/SMB/
FTP/WebDAV) Specify the compression level for saving data in the compact PDF or XPS
format.
•
High Quality: Provides higher quality images, but the data size becomes
larger.
• Standard (default): Provides images of data size and quality of a mid-level
between "High Quality" and "High Compression".
• High Compression: Provides lower quality images, but the data size be-
comes smaller.
Color TIFF Type
(E-mail/Box/SMB/
FTP/WebDAV) Select the compression level used for saving TIFF format data in color. If you
cannot open data saved with [TIFF (modified TAG)] selected, change your
selection to [TIFF (TTN2)] (default).
Graphic Outlining
(E-mail/Box/SMB/
FTP/WebDAV) This function enables you to specify the accuracy of outline processing when
creating an outline PDF.
Scanned document data is separated into text and image, and image is sub-
jected to outline processing. Specify the level of outline processing from
[OFF] to [HIGH].
The outlining level becomes higher in the order of [LOW], [MIDDLE], and
[HIGH].
If [OFF] is specified, the image will not be outlined.
Item Description