Kramer Electronics RC-8iR - Manual (Page 45)

The Kramer RC Configuration Menus
41
11 The Kramer RC Configuration Menus
This section describes the Kramer RC Configuration menus.
11.1 The File Menu
Figure 4 illustrates the File menu and 2 Table defines it: 6
Figure 42: The File Menu
Table 6: File Menu Features
Menu Command Function
New Configuration Click to create a new
device configuration
1
Save Configuration… Click to save the current
configuration
Load Configuration… Click to load a saved
configuration
Driver Manager… Click to open the Driver
Manager window (see
section
5.2 )
Change Working
Directory…
Click to change the
working directory
2
Exit Click to exit the program
11.2 The Edit Menu
Figure 4 illustrates the Edit menu and 3 Table defines it: 7
Figure 43: The Edit Menu
Table 7: Edit Menu Features
Menu Command Function
Copy Macro Click to copy a button
macro command sequence
Paste Macro Click to paste a button
macro command sequence
Clear Macro Click to clear the Macro-
commands sequence box
Clear Button Labels Click to clear all the button
labels
1 This will discard the active configuration
2 The working directory can be changed at any time