Kramer Electronics RC-8iR - Manual (Page 11)

The RC Configuration Software
7
You can download the Configuration program
1
1. Go to our Web site at
from the Internet. To do so:
http://www.kramerelectronics.com and download the
file: “Kramer RC Config.zip” from the DOWNLOADS section.
2. Extract the file “Kramer RC Config.zip” package, which includes the
Kramer RC configuration application setup and the Kramer device drivers
2
3. Install the Kramer RC Configuration application.
When running Setup, you are prompted to set the working directory (see
, to
a folder (for example, C:\Program Files\Kramer RC Configuration).
Figure 2 ):
Figure 2: Driver Data Base Notice
4. Click OK.
The following window appears (see Figure 3 ):
Figure 3: Setting a Working Directory
5. Select or create a new working directory
3
6. Continue to run the setup according to the installation instructions.
.
1 File names are liable to change from time to time
2 Mostly for matrix switchers and switchers
3 The working directory will keep the information that is essential for operating the software. This information will remain
unchanged while upgrading the software