Figure 41: selecting manual link speed, Figure 41 – Kramer Electronics RC-8iR User Manual
Page 44
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Creating a Macro
40
Figure 41: Selecting Manual Link Speed
8. Click OK.
9. Reconnect the power to your RC controller, and check that the buttons now
illuminate in order.
10. Connect the Ethernet crossover cable to your PC and to the RC. Check that the
LEDs on the Ethernet port blink, indicating an active connection.
10.3.2
Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the RC device to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.