Kramer Electronics VS-3232V User Manual

Page 51

Flash Memory Upgrade

10. Close the “ Atmel – Flip” window.
11. Disconnect the power on the

VS-3232V.

12. If required, disconnect the RS-232 rear panel port on the

VS-3232V unit from

the Null-modem adapter.

13. Release the FLASH MAIN button on the rear panel.
14. Connect the power to the

VS-3232V.

Upon initialization, the new

VS-3232V software version shows in the INPUT

STATUS 7-segment Display.

9.2 Ethernet Flash Memory Upgrade

The

VS-3232V firmware is located in FLASH memory, which lets you

upgrade to the latest Kramer firmware version in minutes!
The process involves:

Downloading the upgrade package from the Internet

Connecting the PC to the RS-232 port

Upgrading the firmware

9.2.1

Downloading from the Internet

You can download the up-to-date file

from the Internet. To do so:

1. Go to our Web site at http://www.Kramerelectronics.com and download the

file: “ SetKFRETH11-xx.zip”

from the technical support section.

2. Extract the file “ SetKFRETH11-xx.zip”

package, which includes the

KFR-Programmer application setup and the .s19 firmware file, to a folder (for
example, C:\Program Files\KFR Upgrade).

3. Install the KFR-Programmer Application.

9.2.2

Connecting the PC to the RS-232 Port

Before installing the latest Kramer Ethernet firmware version on the

VS-3232V, do the following:

1. Connect the RS-232 IN DB9 port (COM 1) on the

VS-3232V to a Null-

modem adapter and connect the Null-modem adapter with a 9-wire flat cable

to the RS-232 DB9 COM port on your PC.

2. Push the rear panel ETHERNET FLASH button to

Program using a small

screwdriver.

3. Connect the power on your machine.

1 File names are liable to change from time to time