Kramer Electronics VS-3232V - Manual (Page 37)

Operating Your Video Matrix Switcher
33
7.5 Storing and Recalling Setups
You can store up to 59 settings in the non-volatile memory with the ability to
recall each of those settings.
7.5.1 Storing Setups
To store a setting, do the following:
1. Press the MENU button once.
The Menu buttons 1 illuminate and are enabled.
2. Press the illuminated STO button.
The LCD display shows the message:
01 //
3. Insert a digit from 01 to 59 (for example, press 1 twice for 11).
In the At Once mode, the action is immediately executed and the LCD display
briefly shows
1
:
Memory 11 now stores the current setting.
Note that when saving a setup to an already allocated memory, the TAKE
button blinks and the LCD display shows the message:
You can either:
Press the TAKE button to overwrite the existing setup
Press the ESC button to save the setup to a different memory location
Press the ESC button twice to exit the storing operation
7.5.2 Recalling Setups
To recall a setting, do the following:
1. Press the MENU button once.
The Menu buttons
1
illuminate and are enabled.
2. Press the illuminated RCL button.
The LCD display shows the message:
20 //
3. Insert the appropriate digits from 01 to 59 2 (for example, press 1 twice for 11).
The LCD display shows the recalled setup.
1 In the confirm mode, the TAKE blinks and you have to press the TAKE button to confirm the operation
2 When trying to recall a setup beyond 59, the LCD display shows the following message: *.