Kramer Electronics VS-3232V - Manual (Page 41)

The MENU Commands
37
8 The MENU Commands
The menu lets you configure the VS-3232V to best suit your needs.
To enter the configuration menu, press the menu button twice. The MENU
button illuminates. And the following message appears on the LCD display:
9 :
5 % > :
When browsing through the configuration menu, the enabled buttons are
illuminated.
The ESC button is not illuminated, but is always enabled.
Use the configuration menu as follows:
1. Press the MENU button to scroll through the menu items 1 .
2. Press the ENT button to enter the options in a desired setup.
3. After entering a setup, you can select between several options.
Select a setup option by pressing one of the illuminated buttons in the Selector
Buttons area.
After selecting the desired option, a description of the desired change appears
on the LCD display and the TAKE button blinks.
4. Press the blinking TAKE button to execute the change.
A description of the current state appears on the LCD display for about a
second and then the unit automatically switches to the next item in the menu.
In the example, illustrated in Figure 14, the SYNC configuration is changed
through the configuration menu. You can scroll through the menu items by
pressing the menu button, until you reach the desired item.
1 The LCD display shows the current status of the selected menu item