Kramer Electronics VS-3232V - Manual (Page 40)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your Video Matrix Switcher
36
If the cross-points status of the VS-3232V is different from the other online
switchers in the FOLLOW-System mode, the FOLLOW button stops blinking
and the TAKE button blinks, and the LCD display shows the following
message:
9
8 : : $ : =
3. Press the TAKE button.
The VS-3232V moves to the FOLLOW-System mode. The FOLLOW button
illuminates, the BREAKAWAY button no longer illuminates, the cross-points
change according to the status in the system, and the LCD display shows the
new cross point settings.
To set the VS-3232V unit to function in the BREAKAWAY-from-System
mode:
1. Press the BREAKAWAY button.
The BREAKAWAY button blinks and the LCD display shows the following
message:
6 7 8 9
2. Press the BREAKAWAY button once again.
The switcher moves to the BREAKAWAY mode. The BREAKAWAY
button illuminates, the FOLLOW button no longer illuminates and LCD
display restores it last content
7.8 Using the LOCK Button
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock 1 your VS-3232V. Unlocking releases the
protection mechanism.
To toggle the status of the machine, press and hold the LOCK button.
1 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485 serial (remote controller or PC)