Kramer Electronics VS-3232V User Manual

Page 38

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating Your Video Matrix Switcher

When in the CONFIRM mode (the TAKE button is illuminated), repeat the

steps above and then press the TAKE button to confirm the action.
After recalling a setup in the CONFIRM mode, while the TAKE button is

blinking, you can review the content of the recalled setup using the or the

buttons.

If the recalled setup is not the desired one, you can recall another setup by

entering a different setup number, thus letting you review as many setups as

needed before implementing the required setup.
When trying to recall an empty setup

, the LCD display shows the message:

33 4

followed by the message

20 //

7.6 Using the DEFAULT SETUP Button (Unity Setting)

You can select a configuration that is used often and store it as the default

setup (or the UNITY setting), which can be recalled easily by pressing the

DEFAULT SETUP button. You can enter the default setup via the menu

commands (see section 8.5) and then recall it by the touch of a button.
The default setup stores a setup, which is defined via the DEFAULT SETUP

configuration menu (see section 8.5). The default setup includes the switcher

configuration and the cross-points status, or either one of them. The

configuration menu lets you choose what information will be stored (and

recalled accordingly) in the default setup.
If the machine is set to its default setup, the DEFAULT SETUP button

illuminates. Otherwise it is off.
To set the machine to its default setup:

1. Press the DEFAULT SETUP button.

The DEFAULT SETUP button LED blinks and the following message

appears on the LCD display:

6 7 8

1 That is, a setup # for which no setup is actually stored
2 The same as in step 2 above