Kramer Electronics VS-3232V User Manual
Page 25
Connecting the Video Matrix Switcher
21
6.4.1.1 Connecting a PC to a VS-3232V Unit via RS-232
To connect a PC to a
VS-3232V unit, using the Null-modem adapter provided
with the machine (the default):
1. Connect the RS-232 IN DB9F rear panel port on the Master
VS-3232V unit to
the Null-modem adapter and connect the Null-modem adapter with a 9-wire
flat cable
1
to the RS-232 DB9 port on your PC.
2. Set DIP 7 OFF
2
(enabling Null-modem adapter use) on the
VS-3232V unit.
To connect a PC to the
VS-3232V unit, without using a Null-modem adapter:
1. Connect the RS-232 DB9 port on your PC to the RS-232 IN DB9F rear panel
port on the Master
VS-3232V with a 9-wire flat cable
1
to the RS-232 DB9
port on your PC.
2. Set DIP 7 ON
2
(disabling Null-modem adapter use) on the
VS-3232V unit.
6.4.1.2 Connecting two VS-3232V Units via RS-232
To connect two
VS-3232V units, using a Null-modem adapter provided with
the machine (the default):
1. Connect a flat cable between the RS-232 OUT DB9M port on the first
VS-3232V unit and the Null-modem adapter that attaches to the RS-232 IN
DB9F port on the second
VS-3232V unit.
2. On the second
VS-3232V unit, set DIP 7 OFF
2
(enabling Null-modem adapter
use).
To connect two
VS-3232V units, without using a Null-modem adapter:
1. Connect a flat cable between the RS-232 OUT DB9M port on the first
VS-3232V unit and the RS-232 IN DB9F port on the second VS-3232V unit.
2. On the second
VS-3232V unit, set DIP 7 ON (disabling Null-modem adapter
use).
1 The flat cable should consist of at least three straight-through wires for PINs 2, 3 and 5
2 See section 6.2.3