Hydraulic or manual lift - pull & offset type, Hydraulic offset semi-mount, Assembly – Alamo FC-0016 User Manual
Page 92: Assembl y
ASSEMBLY
A96B 03/06
Assembly Section 3-8
© 2006 Alamo Group Inc.
ASSEMBL
Y
HYDRAULIC OR MANUAL LIFT - PULL & OFFSET TYPE
Attach the Spring Assembly option (Figure ASM-R-0111) to the lug on the mower deck behind the Center
Gearbox. Retain using 1 x 2-3/4 bolt and locknut. Install the Hydraulic Cylinder (Figure ASM-R-0111) or the
manual Ratchet Lift Screw 1"x 2-3/4” (Figure ASM-R-0112) between the Axle Center Lug and the Lug directly
behind the Center Gearbox. Tighten all Bolts securely.
HYDRAULIC OFFSET SEMI-MOUNT
Base unit is shipped assembled as shown except for cylinder and hoses. Remove shipping strap from frame
and install hydraulic cylinder and hoses as shown in Figure ASM-R-0145. Route hoses on top of deck to
provide easy access to tractor remote parts.