Alamo FC-0016 - Manual (Page 101)

OPERATION
A96B 03/06 Operation Section 4-3
© 2006 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
A96B
Horsepower Required 50 HP
Cutting Capacity (Max.) 2”
Cutting Height 1-12”
Safety Deflector Std.
Cutting Width 8’
Overall Length 101”
136”
Weight (Approx.) 1490 lbs (Lift Type)
1630 lbs (Pull Type)
Hitch CAT II-III and Q.H.
Blade Carrier Pan
Blade Tip Speed (FPM) 15,218 (540 RPM)
16,952 (1000 RPM)
Center Gearbox Rating 120 HP
Outboard Gearbox Rating 110 HP
Output Shaft Diameter 2”
Driveline Size Cat 4
Deck Thickness 10 Ga.
Side Skirt 1/4” x 9”
Transport Width 103”
Jack Stand Std.
Overall Width 103”
Replaceable Skid Shoes Std.
Blade Overlap 4”
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for
which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component
damage and equipment failure resulting in possible serious injury or death.
(SGM-14)