1 foreign debris hazards, 2 bystanders/passersby precautions, Operation – Alamo FC-0016 User Manual
Page 128: Opera t ion
OPERATION
A96B 03/06
Operation Section 4-30
© 2006 Alamo Group Inc.
OPERA
T
ION
11.1 Foreign Debris Hazards
Before mowing, inspect the area to make sure
there are no foreign objects that the mower blades
could hit or become entangled with. Remove all
foreign objects and debris. If objects are too big to
remove, mark them clearly and be sure to prevent
the mower blades from contacting them.
If you hit a solid object or foreign debris, stop the
mower and tractor at once. Immediately idle the
engine speed and disengage the PTO. Wait for all
mower rotating motion to stop, then raise the
mower and move the tractor and implement off the
object. Inspect the area and remove, or mark the
location of the debris. Inspect the condition of the
mower and make any needed repairs immediately.
Make sure the blades are not damaged and the
carrier is balanced before resuming operation.
Always wear your seat belt securely fastened and
only operate the tractor and mower with the ROPS
in the raised position. If the tractor or mower hits a
tree stump, rock, or bump, a sudden movement
could throw you off of the seat and under the
tractor and/or mower. The seat belt is your best
protection from falling off the tractor and the ROPS
provides protection from being crushed during a
tractor roll-over. OPS-R-0023
11.2 Bystanders/Passersby Precautions
If a bystander comes within 100 yards of the tractor while the mower is being operated, stop the tractor at
once, idle the engine and disengage the PTO. Do not engage the PTO again until all bystanders are well past
the 100 yard distance. OPS-R-0024