Operation, Opera t ion – Alamo FC-0016 User Manual
Page 120

OPERATION
A96B 03/06
Operation Section 4-22
© 2006 Alamo Group Inc.
OPERA
T
ION
•
Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and
tightened.
•
Pull and Semi-Mount Type-Ensure that the
tailwheel ratchet or hydraulic cylinder is
installed and retained correctly to provide the
desired cutting height.
•
Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_D
•
Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
•
Ensure the driveline integral shield is in good
condition and rotates freely.
•
Ensure the driveline slip clutch is properly
adjusted. OPS-R-0039
•
Inspect the gearbox oil level. A low oil level is a
warning sign that the gearbox may be cracked
or its seal is damaged and needs replacement.
•
Ensure the gearbox vent is in place and free
from clogs. OPS-R-0040