beautypg.com

3 setting deck pitch, Driveline attachment, Setting deck pitch -15 driveline attachment -15 – Alamo FC-0016 User Manual

Page 113: Operation, Opera t ion

background image

OPERATION

A96B 03/06

Operation Section 4-15

© 2006 Alamo Group Inc.

OPERA

T

ION

6.3 Setting Deck Pitch

To facilitate safe and efficient operation, the mower

should be operated with the deck approximately

3/4” LOWER IN THE FRONT THAN THE REAR.

Setting Deck Pitch-Lift and Semi-Mount Type

1.

Lower the mower until the rear of the mower is
resting securely on its tail wheel.

2.

Lower the 3-point lift arms further until the front
of the mower is at least 3/4” lower than the rear.

3.

Place the tractor’s 3-point control lever stop at
this point to maintain the deck pitch.

Setting Deck Pitch-Pull Type

1.

Adjust the leveling rod linking the tongue to the
rear axle until the front of the mower is at least 3/4” lower in the front than the rear. To lower the front,
lengthen the leveling rod and to raise the front, shorten the leveling rod.

Operating the mower with the front of the deck slightly lower than the rear allows the mower to cut the grass

only once and requires less work from the tractor. In addition, a more even distribution of the clippings from

the rear of the mower will be achieved with this angle

. OPS-R-0002_E

7. DRIVELINE ATTACHMENT

The driveline yoke and tractor PTO shaft must be

dirt free and greased for attachment.

To connect the mower driveline to the tractor PTO

output shaft, pull the driveline yoke collar back and

align the grooves and splines of the yoke with those

of the PTO shaft. Push the driveline yoke onto the

PTO shaft, release the locking collar, and position

the yoke until the locking collar balls are seated

onto the PTO shaft. Push and pull the driveline

back and forth several times to ensure a secure

attachment. OPS-R-0003_A

When attaching the Implement input driveline to the Tractor PTO, it is important that the

connecting yoke spring activated locking collar slides freely and the locking balls are seated

securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the Tractor PTO shaft

could come loose and result in personal injury and damage to the Implement.

(S3PT-17)

This manual is related to the following products: