Terminal server ports, Aco switch, Craft port – ADTRAN MX410 User Manual
Page 46: Table 4-5, Terminal server port pin list -8, Terminal server port pin list in
Front Panel
MX410/MX412 System Manual
4-8
PRELIMINARY
61189500L1-1B
Terminal Server Ports
The four Terminal Server port RS-232 interfaces located on the front panel are used to
remotely connect to RS-232 managed devices.
CAUTION
The 8-pin modular Terminal Server Port 1-4 jacks should never be
connected to a telecommunications network and are intended for
connection to RS-232 data interfaces only.
The Terminal Server ports are accessed by establishing a Telnet session to the MX410/MX412
with the TCP Port Number of the particular port. The pin assignments for each of the RS-232
interfaces are listed in
.
ACO Switch
The Alarm Cutoff (
ACO
) Switch turns off audible and visual alarms connected to the alarm
relays. Pressing the ACO Switch acknowledges alarms.
Craft Port
The DB-9 (RS-232)
CRAFT
port is used to login and provision the MX410/MX412 through a
VT100 terminal or VT100 terminal emulation software such as HyperTerminal or ProComm
Plus.
Table 4-5. Terminal Server Port Pin List
Pin
Function
1
GND
2
No Connect
3
TXD
4
No Connect
5
RXD
6
No Connect
7
No Connect
8
No Connect