ADTRAN MX410 - Manual (Page 30)

Integrated Wireless Access Device or DS0 Grooming MX410/MX412 System Manual
3-12 PRELIMINARY 61189500L1-1B
Integrated Wireless Access Device or DS0 Grooming
The following applies to Remote Site #1 shown in Figure 3-14 and Figure 3-15 . In the
Integrated Wireless Access Device Application, bandwidth is conserved by using the MX410 to
groom multiple fractional T1s into a single T1. This allows the MX410 to be used as an
integrated wireless access device (see
Figure 3-14 ) or to transport DS0s between several sites
(see Figure 3-15 ). Refer to “PPP BCP/IPCP Menu” on page 5-32 for more information about
using PPP. and refer to “Alarm Pass Thru” on page 5-19 for information about visibility
through the cross connect.
Figure 3-14. Integrated Wireless Access Device Diagram
24 DS0s
from Central Site DS1
µ Wave/
Leased
DS1
DS1 #1
DS1
Central
Site
ETH1
V.35
DS1 #2 DS1 #3
DS1 #4
MX410
Remote Site #1
ETH2
Switch
Digital
Base Station
Transceiver
Digital
Base Station
Transceiver
Analog
Base Station
Transceiver
E911
Battery
Charger
TSR1
Other systems
currently managed by
the MX410 through
an Ethernet port
to Ethernet port
connection