HID DTC4500 User Guide - Manual (Page 139)

© 2011 HID Global Corporation All rights reserved
DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1
139
Configuring Fluorescent Data (F-Panel for YMCFKO Ribbon) using the
Workbench
Step Procedure
12 Set the Ribbon for YMCFKO in the Printing Preferences. (Note: The
Automatically detect the installed Ribbon for every print job button may
also be used. The F-Panel Ribbon must be installed for this process to work.)
13 Check Invert F-Panel Image to create a negative of the fluorescent image.
• This refers to the ability to cause light or white areas of the image to
fluoresce and dark colors to remain dark on the printed card when exposed
to a UV light.
• This was requested because the fluorescent dye color is bright when black
light is applied to it.
• By default, the dark areas of the image will fluoresce on the card and the
lighter or white areas will have no dye applied. (Note: This may improve the
look of the person’s image if used for the Logo.)