Additional printer specific tools – HID DTC4500 User Guide User Manual

Page 114

2011

HID

Global

Corporation

All

rights

reserved

DTC4500 Card Printer/Encoder User Guide L001444 Rev1.1

114

Additional Printer Specific Tools

Label Description

INFO

• Printer Type
• Firmware Version
• I.P Address
• Flipper
• Lamination
• Magnetics
• E-Card
• Password
• Card count

TEST
PRINTS

Color Photo:

Select this to print a color card to test communication and integrity.

Alignment:

Select this to print a card used to align the print image on the card.

Settings:

Select this to print a card with the Advanced settings.

Resin:

Select this to print a RESIN test card.

Rewritable:

Select this to ERASE the Rewritable card.

Magnetic:

Select this to test Magnetic encoding. (Hi-Co only)

Lamination:

Select this to laminate a test card.

Hopper
Select

Abliity to select which hopper to feed cards from. Applies to Dual
Hopper Printers.

Toolbox

Clean Printer:

Select this to run the clean printer routine.

Clean Laminator:

Select this to run the clean laminator routine.

Calibrate Mag:

Select this to calibrate the Magnetic Sensor